The Crack Programming Language Guide

Because life is too short to wait for software.


Author: Michael Muller
Contributions by: Shannon Weyrick, Conrad Steenberg
  1. The Crack Programming Language Guide
    1. Overview
    2. Installation
    3. Execution
    4. Hello World
    5. Comments
    6. Variables and Types
      1. Constants
      2. Built-in Types
      3. Integer Constants
      4. Floating Point Constants
      5. Implicit Conversion
      6. Explicit Conversion
      7. Strings
      8. Sequence Constants
    7. Control Structures
      1. The while statement
      2. The for statement
      3. The try/catch and throw Statements (Exceptions)
    8. Functions
      1. Functions are Values
      2. Forward Declarations
    9. Interpolation Expressions
    10. Aliases
    11. Operators
      1. Comparison Operators
      2. Basic Arithmetic
      3. Bitwise Operators
      4. Augmented Assignment
      5. The Ternary Operator
      6. Precedence
      7. The typeof() Operator
    12. Classes
      1. Classes are Variables
      2. Constructors
      3. Inheritance
      4. Multiple Inheritance
      5. Member Access Protection
      6. Destructors
      7. Abstract Methods
      8. Static and Final Methods
      9. The Special Base Classes
      10. Interfaces
      11. Special Methods
      12. Operator Overloading
      13. Functors
      14. Method Resolution in Classes
      15. Forward Declarations of Classes
    13. Generics
    14. Modules
      1. Access Protection
    15. Protocols
      1. The Iteration Protocol
      2. The Formatter Protocol
      3. The Sequence Constant Protocol
    16. Reference Counting
    17. Primitive Bindings
    18. Annotations
      1. Inspecting Parser State
      2. Registering Parser Callbacks
      3. Function Flags
      4. Error Contexts
      5. Built-in Annotations
      6. The Standard Annotations
      7. Assertions
      8. Structs
      9. Annotations in Generics
    19. Extensions
      1. The Extension Generator
    20. Numeric Types
    21. Threading
    22. Debugging
    23. Encoding
  2. Appendix 1 - Libraries
    1. Special Language Types
      1. Strings and Buffer Types
      2. CString
      3. ManagedBuffer
      4. SubString
      5. Standard Exceptions
    2. Containers
      1. Iterators
      2. Arrays
      3. Linked Lists
      4. Doubly-Linked Lists
      5. TreeMap
      6. HashMap
      7. Algorithms (Sort Functions)
    3. Legacy Error Handling
    4. The strutil Module
    5. The ascii Module
    6. Program Control (sys)
    7. Input/Output
    8. Threads
      1. Mutexes
      2. Conditions
      3. Queues
    9. Line Readers
    10. Dealing with the Filesystem
    11. Files and Directories (the Old Way)
      1. FileInfo
      2. File
      3. Directory
    12. Process
    13. Regular Expressions
    14. Math
    15. Bindings
      1. Opaque
      2. Wrapper
    16. Networking
    17. Logging
    18. GTK
    19. Command Line Option Processing
  3. Appendix 2 - Migration
    1. From 0.8 to 0.9
    2. From 0.7 to 0.8
    3. From 0.6 to 0.7
    4. From 0.5 to 0.6
    5. From 0.4 to 0.5
    6. From 0.3 to 0.4
    7. From 0.2 to 0.3
    8. Compatibilty
  4. Appendix 3 - Library Conventions

The Crack Programming Language Guide

This is the Manual for version 0.9 of the Crack Programming Language. We regard this version largely as an alpha 1.0 release - compatibility breakage between this and 1.0 should be very limited. There are still some usability gaps in the system, mostly with respect to debugging and caching. And as of now, we've only verified the functionality of the platform on Linux.

But that said, Crack is now largely usable for real work, and if you're looking for a language like this, now is an excellent time to get involved in it.

So without further caveats - let's do some Crack!

Overview

If you're a seasoned programmer, here is a quick profile to help orient you to Crack:

Major Influences

C, C++, Java, Python

Syntax

C-style, curly-brace

Typing

Static, strong (with some implicit conversion)

Compiler

native compiled, either JIT (at runtime) or AOT (native binary)

Paradigms

Object oriented, procedural

Garbage Collection

Reference counted objects, programmer controlled

OO Features

Virtual functions, overloaded functions, multiple inheritance, generics.

Crack has been developed on Linux x86 and x86-64. It is highly questionable whether it will build under any other platform. Portability will play a bigger role in future versions of the language.

Installation

See the INSTALL file for the latest installation instructions.

Execution

crack may be run in one of two ways: as a scripting language (like Python) or as a traditional compiler that creates native binaries (like C++). Both methods will compile to the native instruction set and run similar optimizations. We call these two methods JIT (Just In Time) and AOT (Ahead Of Time) compilation, respectively.

To run a script in the JIT, simply follow the standard "hashbang" practice of putting the crack binary as the program loader in the first line of your script, like so:

    #!/usr/local/bin/crack
    import crack.io cout;
    cout `hello world!\n`;

If you write this as a script and "chmod u+x" it, when you run it you should see "hello world!" written to the terminal. Changes to the script do not require any explicit compile command - simply rerun the script.

Instead of (or in addition to) the hashbang, you may also run a script directly by calling "crack <scriptfile>".

    $ crack hello.crk
    hello word!

To compile your script to a standalone binary (AOT), simply call "crackc" instead of "crack". Thus executing "crackc hello.crk" will produce a binary "hello" which, when run, executes your code and displays output to terminal:

    $ crackc hello.crk
    $ ./hello
    hello word!

As with all AOT compilers, in this mode of work you must recompile your script and run the resulting binary before seeing any changes to your codebase. However, keep in mind that you are free to develop in the JIT and deploy a final binary with AOT if you'd like. Both methods should run your code in an identical manner.

Note that during native compilation, all imported crack scripts will be "statically" compiled. This means that all imported scripts, including those you import from the crack standard library, will become a static part of your standalone binary and consecutive changes or updates to those scripts will not affect your (previously compiled) standalone binaries. In other words, there are no "shared crack libraries" currently.

For more command line options that affect execution and compilation including verbosity, optimization levels, and debug output, see "crack --help".

Hello World

Let's examine the crack "hello world" program again:

    #!/usr/local/bin/crack
    import crack.io cout;
    cout `hello world!\n`;

If you write this as a script and "chmod u+x" it, when you run it you should see "hello world!" written to the terminal.

As mentioned, the first line is the standard unix "#!" line. It tells the kernel to execute the script by passing its full name as an argument to the "/usr/local/bin/crack" program.

The second line imports the "cout" variable from the crack.io module. Like C++, Crack uses "cin", "cout" and "cerr" for its standard input, output and error streams. "cout" and "cerr" are both "formatters," which means that they support the use of the back-tick operator for formatting text.

The third line actually uses the back-tick operator to print some text. We won't go into too much detail on this operator right now (see The Formatter Protocol) - suffice it to say that this line is roughly equivalent to "cout.format('hello world!\n');" The "\n" at the end of the string translates into a newline (the ASCII "LF" character, character code 10).

Expressions consisting of a value followed by back-tick quoted text and code are called "interpolation expressions."

Comments

Crack permits the use of C, C++ and shell style comments:

    /* C Style comment */
    // C++ style comment
    # shell style comment

For code that you hope to get a lot of re-use out of, we recommend the convention of Doxygen-style doc-comments for classes, functions and global variables:

    /** C-style doc-comment */
    /// C++ style doc-comment
    ## shell-ish doc-comment

These currently get treated the same as any other comments. However, future versions of Crack will parse them and store them with the meta-data for the code, permitting the easy extraction of reference documentation from the source.

Variables and Types

Like most languages, Crack allows you to define variables. But unlike most other scripting languages, Crack is statically typed so you must specify (or imply) a type for all variables.

    # define the variable i and initialize it to 100.
    int i = 100;

You can also define variables using the more terse ":=" operator, which derives the type from that of the value:

    i := 100;           # equivalent to "int i = 100;"
    j := uint32(100);   # equivalent to "uint32 j = 100;"

If you don't specify an initializer for a variable, the default initializer will be used. For the numeric types, this is zero. For bool, it's false. For complex types (which we'll discuss later), a null pointer is used..

Constants

The const keyword introduces a constant definition. Constants have roughly the same syntax as variable definitions, but they must always have initializers:

    const int A = 0, B = 1, C = 2;
    const X := 100;

A constant is a variable whose value can not be modified. In truth, primitive constants (having numeric types) aren't really variables at all. Their values are injected wherever they are used at compile time, saving the space of a variable and the cost of a variable lookup.

Aggregate and primitive pointer constants are normal variables that cannot be modified by assignment. This rule applies to the variables themselves, not the objects they reference. For example, the following code is legal:

    const array[int] VALS = {3};  # an array of three elements
    VALS[0] = 100;

We can modify VALS[0], it would have been an error to do this:

    VALS = array[int](10);  # ParseError!

Built-in Types

The Crack language defines the following set of built-in types - these can be expected to exist in every namespace without requiring an explicit import:

void

The "void" type - this only exists so you can have a function that doesn't return anything. You cannot declare a variable of type 'void'.

byte

An 8-bit unsigned integer (like C's unsigned char)

bool

A boolean. Values are true and false, which are built-in variables.

int16

A 16-bit signed integer.

uint16

A 16-bit unsigned integer.

int32

A 32-bit signed integer.

uint32

A 32-bit unsigned integer.

int64

A 64-bit signed integer.

uint64

A 64-bit unsigned integer.

float32

A 32-bit floating point.

float64

A 64-bit floating point.

int

An integer of the C compiler's default int-size for the platform. This must be at least 32 bits and no more than 64 bits in size.

uint

An unsigned integer of the C compiler's default unsigned int-size for the platform. Like int, this must be at least 32 bits and no more than 64 bits in size.

intz

An integer the size of the C compiler's pointer. intz and uintz are used for memory sizes, pointer offsets, array indices and cases where we want to represent pointers as integers. intz is equivalent to ssize_t in C++.

uintz

An unsigned integer the size of the C compiler's pointer. uintz is equivalent to size_t in C and C++.

float

A floating point of the C compiler's float size for the platform. This must be at least 32 bits and no more than 64 bits in size.

byteptr

A pointer to an array of bytes (roughly like C's char*)

voidptr

A pointer to anything (like C's void*). All high level classes can implicitly convert to voidptr.

array[type]

The low-level array type. You should generally avoid using this in favor of high-level data structures (see crack.cont.*). They are not memory-managed, and don't do memory management of their elements.

To use it, you specialize it with another type, for example: array[int] is an array of integers.

function[return-type, arg-type ...]

The type of a function with the corresponding return type and argument types.

VTableBase

The base class used for all classes that can have virtual functions (more on this later).

Object

The implicit base class of all classes that don't define base classes (extends VTableBase)

String

An immutable, memory managed string of bytes. Strings are character set neutral and may contain null bytes.

StaticString

This is a String whose buffer can point to read-only memory.

Class

The type of class objects themselves. Crack classes exist at runtime as well as compile time. See Classes are Variables.

Of these, the byte, bool, int, uint and float types (including all variations of int, uint and float) are primitives. These types are notable in that they are copy-by-value and consume no memory external to the scope in which they are defined.

The byteptr, voidptr and array types are classified as primitive pointer types. These are essentially memory addresses: they are copied by value: the memory that they reference is not.

Primitive types, primitive pointer types, and the void type are all classified as low-level types. They are distinguished from the higher level aggregate types by naming convention: low-level types will always be all lower case (and digits) while high-level types (at least the ones in the standard libraries) will always begin with an upper-case character. You may not currently subclass low-level types (see Inheritance) but this restriction will be lifted in a future version of Crack.

High level or aggregate types are first class objects: variables of these types are pointers to allocated regions of memory large enough to accommodate the state data defined for the type. They can be extended to create other high-level types through sub-classing (see Inheritance).

Type names in Crack are very simple. They are either a single word or "word [ type-list ]" The latter form is used both for the built-in types array and function, and for Generics.

Integer Constants

Integer constants can be defined as an integer value in the code:

    int i = 100;
    int j = -1;

Integer constants are "adaptive", which means that they will convert to whatever type is required by their usage as long as the value is within the range of values for that type (for example, "uint u = -1" would be illegal).

Integer constants can be defined using hexadecimal, octal or binary notation as well as the default decimal notation. Examples follow:

    int x = 0x1AF;  # hex constant
    int o1 = 0117, o2 = 0o117; # both the same octal constant, c-style and
                               # normalized notation.
    int b = 0b10110; # binary constant

You can also specify integer constants as the byte values in strings by specifying a "b" (for byte) or "i" (for integer) prefix to a constant string (either single or double-quoted). For example:

    b := b'A';  # b is set to 65, the ASCII value of A
    int n = i'\001\0';  # i is set to 256
    int64 magic = i"SpugCrak";  # magic = 6012434588913262955

This usage helps to make up for the fact that Crack uses the single quote as an alternate string delimiter, making it otherwise impossible to define single character constants as you would in C. As the example suggests, the more general integer form is useful for specifying magic numbers. The bytes in a string integer constant are ordered from high-byte to low-byte on any architecture, regardless of how integers are stored.

For more information on how numeric constants work with other types, see Numeric Types.

Floating Point Constants

Floating point constants look just like floating point constants in most other languages. They consist of a decimal mantissa and an optional exponent.

Examples:

    float f = 1.0;
    f = 3.1e+6;
    f = 1.2e-14;
    f = .25;

For more information on how floating point constants interact with other types, see Numeric Types.

Implicit Conversion

In certain cases, types will automatically convert to other types. Most types will implicitly convert to boolean, allowing pretty much anything to be used as the condition in an if or while statement.

Aggregate types will implicitly convert to voidptr.

Numeric types are slightly more complicated.

First of all, you can always perform explicit conversion between any two numeric types using type constructor notation (see Constructors below):

    int32 i = {100};  # the '{100}' is equivalent to 'int32(100)'
    i = int32(200);
    byte b = {i};
    b = byte(i + 1000);  # 1200 is bigger than a byte can hold, the result
                         # will be truncated

There are two kinds of numeric types, Universal Numeric Types (UNTs) and Platform Dependent Numeric Types. The UNT types are byte, int16, uint16, int32, uint32, int64, uint64, float32 and float64. These are guaranteed to be of the same size no matter what the preferences of the platform. A numeric type can implicitly convert to a UNT as long as there is no risk of precision loss on any platform. Since we define most PDNTs to be either 32-bit or 64-bit values, this means that we can always implicitly convert from, for example, an unsigned int to a uint64, but we can never implicitly convert from an uint to a uint32.

The PDNTs are int, uint, intz, and float. Any numeric type can implicitly convert to a PDNT.

In general, if you care about precision you should use a UNT. Otherwise, PDNTs can be more convenient.

    # implicit conversions
    byte b;
    int32 i32 = b;
    uint32 u32 = b;
    int64 i64 = i32;
    i64 = u32;
    uint64 u64 = u32;
    float32 f32 = b;
    float64 f64 = i32;
    f64 = u32;

    # conversions to PDNTs - note that these may truncate the value and lose
    # information.
    int i = f32;
    uint u = i64;
    intz iz = f64;
    float g = i64;

    # explicit conversions
    i32 = int32(i64);
    b = byte(f32);
    i64 = int64(u64);

See the section on Numeric Types for more information on the philosophy and details of how numeric conversions work.

Explicit Conversion

As noted in the section above, we can force a conversion between numeric types with an expression of the form type-name ( value ). This works for other types, too, and allows us to do some interesting things.

We can convert any pointer type or aggregate type to a uintz representing the address of the object:

    byteptr b = getBytePtr();
    cout `address of b is $(uintz(b))\n`;

    class A {}  // see "Classes" below.
    A a = {};
    cout `address of a is $(uintz(a))\n`;

We can also convert any pointer type to a byteptr or array:

    A a = {};
    byteptr b = byteptr(a);
    byteptr c = {a};  # alternate construction syntax works, too.
    d := byteptr(a);

    ints := array[int](b);

These conversions, like byteptr and array operations in general, are unsafe. They allow you to circumvent the static protections in the language and read and write to unmanaged regions of memory. Nevertheless, they have some valuable uses, like low-level buffer manipulation.

Strings

Most programming languages support strings of characters, which are usually implemented as some kind of array. Crack strings are strings of bytes - you can embed any kind of byte values you want in them (including nulls) and there are no assumptions about encoding (see The ascii Module for information on working with ASCII strings).

String constants are sequences of bytes enclosed in single or double quotes (which are equivalent forms):

    String s = "first string";
    t := 'second string';

String constants are actually instances of the "StaticString" class - they're just like strings except that since their buffers are constants, they don't try to deallocate on destruction.

As in the other C-like languages, string constants (both single and double quoted) can have escape sequences in them. We've dealt with one of these already ("\n"). The full list is:

\t

ASCII Tab character (9).

\n

ASCII newline character (10).

\a

ASCII alarm character (7).

\r

ASCII carriage return (13).

\b

ASCII backspace (8).

\x XX

Two digit hex character value (examples: "\x1f", "\x07")

\ OOO

1 to 3 character octal character value. (examples: "\0", "\141")

\ literal-newline

If you put a backslash in front of the end of the line in a string, the newline is ignored. This allows you to wrap large strings across multiple lines.

In certain cases (most notably, regular expressions) it is desirable that the backslash not be an escape character, but be passed through verbatim. For these cases, we can define a raw string constant using an "r" prefix (similar to python):

    val := r'test\nstring';
    cout `$val\n`;  # prints "test\nstring"

It is very important to note that strings should be considered immutable. It is inappropriate to modify the contents of a String buffer or its size. For that matter, it is inappropriate to do this to any kind of Buffer derivative except for those derived from WriteBuffer. See Compatibilty for more information.

When defining very long string constants, it is useful to have facilities for wrapping the constant across multiple lines (in general, very long lines are difficult to read). Crack string constants facilitate this by folding adjacent constants (similar to languages like C and python) and also through the definition of "indented strings."

String constant folding is straighforward: adjacent string constants will be treated as a single string constant:

    a := 'this is a multi-'
         'line string!';

In the example above, the value of a is "this is a multi-line string".

All string constants in crack can span multiple lines, so we could have written then same example as:

    a := 'this is a multi-\
    line string';

The backslash at the end of the first line escapes the newline so it doesn't show up in the string. If we had omitted it, the value would have been "this is a multi-\nline string".

The problem with this approach to wrapping is that it breaks indentation. For example:

    String usage() {
        return 'Usage:
    foomatic <arg> [options]
    This is a lengthy explanation of the purpose of the \
    usage function.
    Options:
      -h show help
    ';
    }

In the example above, we've created a usage message in a single string constant, but we've made a mess out of the indentation of our code. We could have used adjacent string constants to solve this, but that would require a lot of extra quotes and escape characters.

To solve this problem more elegantly, Crack introduces indented string constants. A string prefixed with a capital "I" is treated as an indented string. Indented strings are handled as follows:

For example, we could have implemented our usage function as follows:

    String usage() {
        return I'Usage:
                 foomatic <arg> [options]
                 This is a lengthy explanation of the \
                 purpose of the usage function.
                 Options:
                  -h show help
                 ';
    }

This returns the same string as the earlier example, but most programmers would probably agree that the code is more readable by virtue of the indentation.

Sequence Constants

Most modern languages provide some syntax for defining entire data structures in the code. This is a nice convenience in that the alternative is usually to write a lot of tedious code to compose them.

Crack supports this feature in the form of sequence constants. For example, to define a low-level array of integers we could do this:

    array[int] a = [1, 2, 3, 4];

Sometimes it's useful to be able to do this sort of thing in an expression, for example to pass a sequence argument to a function. Since the compiler doesn't know the type in these cases, we have to specify it explicitly by preceding the list with the type followed by an exclamation point.

For example, we could have used the define operator in conjunction with this notation to write the definition above as follows:

    a := array[int]![1, 2, 3, 4];

Sequence constants can also be used with aggregate types. Types need only implement The Sequence Constant Protocol as defined below.

As a reminder, we're using array here because we've already introduced it. You'll generally want to use the memory-managed Array collection instead (see Arrays).

Control Structures

Crack 0.9 supports four control structures: the "if/else" statement, the "while" statement, the "for" statement and the "try/catch" statement. "if" runs code blocks depending on whether a condition is true or false:

    import crack.io cout;
    if (true)
        cout `true is true\n`;
    else
        cout `something is wrong\n`;

The code above will always print out "true is true".

If we wanted to do something a little more useful, we could have used it to check the command line argument:

    import crack.sys argv;
    import crack.io cout;

    if (argv.count() > 1 && argv[1] == 'true')
        cout `arg is true\n`;
    else
        cout `arg is false\n`;

There's a lot of new stuff going on here: first of all, we're importing the "argv" variable form crack.sys. This variable contains the program's command line arguments.

count() is a method (a function attached to a value called "the receiver") that returns the number of items in argv. argv[1] accesses item 1 of the argument list (indexes are zero-based, so item 1 is the second element of the sequence).

The "&&" is a short-circuit logical and: it returns true if both of the expressions are true, but it won't evaluate the second expression unless the first is true. This is important in this case, because if we were to check argv[1] in a case where argv had less than two elements, a fatal error would result.

There is also a "||" operator which is a short-circuit logical or. It returns true if either expression is true but does not evaluate the second expression if the first is true.

The if statement need not be accompanied by an else:

    if (argv.count() > 1 && argv[1] == 'true')
        cout `arg is true\n`;
    cout `this gets written no matter what the args are\n`;

The code in an if or an else can either be a single statement, or a sequence of statements enclosed in curly braces:

    if (argv.count() > 1 && argv[1] == 'true') {
        cout `arg is true\n`;
        cout `and so are you!\n`;
    }

You can also chain if/else statements:

    argCount := argv.count();
    if (argCount > 2)
        cout `more than one arg\n`;
    else if (argCount > 1)
        cout `just one arg\n`;
    else
        cout `no args.\n`;

Note that blocks of code in curly braces can include the definitions of new variables that are only visible from within that block. Each block is a namespace that inherits definitions from the outer namespace. The top-level code in the file is the module namespace.

The while statement

The while statement repeatedly executes the same code block while the condition is true. For example, we could iterate over the list of arguments with the following code:

    import crack.sys argv;
    import crack.io cout;

    uint i;
    while (i < argv.count()) {
        cout `argv $i: $(argv[i])\n`;
        ++i;
    }

Note that the code in the while is enclosed in curly braces. In general, the code managed by a control structure can either be a single statement, or a group of statements enclosed in curly braces. The if statement works the same way.

This example also introduces the primary feature of the back-tick operator: variable interpolation. A dollar sign followed by a variable name formats the variable. A dollar sign followed by a parenthesized expression formats the value of the expression.

The for statement

Crack supports two different flavors of "for": C-style and "for-each" style (as used in Python, JavaScript, Java and Perl).

The C-style for statement looks like a while statement, but the parenthesized form at the beginning consists of three parts:

So for example, the more concise way to express the loop above would be:

    for (uint i; i < argv.count(); ++i)
        cout `argv $i: $(argv[i])\n`;

Notice that the first section is a variable definition. This is allowed. The semantics are similar to C++: the variable is defined for the scope of the loop.

Any one (or all) of the sections of the parenthesized form after the "for" keyword can be omitted. So this would be the equivalent of a "while" statement:

    for (;expr;) stmt 

Likewise, an infinite loop could be written as:

    for (;;) stmt 

The for statement also supports a for-each style usage:

    String argVal;
    for (argVal in argv)
        cout `arg is $argVal\n`;

In the example above, argVal will be set to each element of argv in succession. There is also a ":in" variation on the "in" keyword that defines the variable for the scope of the loop, so we could have omitted the argVal definition and done this:

    for (argVal :in argv)
        cout `arg is $argVal\n`;

The value on the right side of the "in" keyword (in this case argv) must conform to The Iteration Protocol as documented below. All high-level container types implement this protocol. Sadly, low-level arrays can not because there is no way to specify a length for them.

"for-in" creates an underlying iterator variable, but hides it. It is often desirable to have access to the iterator. For example, you may want to modify a sequence as you iterate over it and a the sequence might have a mutator that accepts an iterator.

For this use case, there is also a "for-on" variation of this statement:

    for (iter :on argv) {
        argVal := iter.elem();
        cout `arg is $argVal\n`;
    }

As the example suggests, the "on" keyword provides a ":on" variation which defines the iterator variable for the scope of the loop.

The try/catch and throw Statements (Exceptions)

Like many modern languages, Crack supports exceptions. Exceptions provide a means for consolidating all of your error handling in one place, so it doesn't have to be scattered throughout the code.

Crack exceptions are syntactically similar to C++ and Java exceptions. They are implemented using the try/catch and throw statements:

    try {
        throw Exception('badness occurred');
    } catch (Exception ex) {
        cout `exception caught: $ex\n`;
    }

In the trivial example above, the throw statement transfers control to the subsequent catch statement, aborting all processing and cleaning up all variables up to the catch. The "ex" variable would be set to the value of the expression in the throw statement.

Expression handling is most often used across function calls. For example, lets say we have a function that creates file objects:

    FileObj open(String filename) {
        if (!exists(filename))
            throw InvalidResourceError(filename);
        else
            return FileObj(lowLeveOpen(filename));
    }

Control would be transferred to the first catch in the call stack matching InvalidResourceError (by specifying either that class or a base class).

The expressions in a throw clause can not be of arbitrary type. In particular, they must be a type derived from VTableBase. In general, you also want to use types derived from crack.lang.Exception in order to get stack traces recorded in the exception.

Certain parts of the exception handling system haven't been implemented yet. If you throw an exception from a constructor or a destructor, instance variables and the object itself will not get cleaned up properly. Also, rethrowing the current exception from a catch clause is not yet implemented.

Having an exception handler doesn't impose any runtime performance penalty. However, throwing an exception is very costly. For this reason, we recommend against using exceptions as a form of general flow control for frequently executed code paths.

Functions

Functions let you encapsulate common functionality. They are defined with a type name, an argument list, and a block of code, just like in C:

    int factorial(int val) {
        if (val == 1)
            return 1;
        else
            return val * factorial(val - 1);
    }

Also note that Crack supports recursion: you can call a function from within the definition of that function.

You can define a function that doesn't return a value by using the special "void" type:

    void printInt(int i) {
        cout `$i\n`;
    }

Primitive types (such as "int") are always passed "by value." The system makes a copy of them for the function. If they are high-level types, you can modify the objects that they reference from within the function.

Multiple functions can share the same name as long as their arguments differ: this feature is called overloading. For example, rather than "printInt" above, we could have defined a print function for multiple types:

    void print(int64 i) {
        cout `int $i\n`;
    }

    void print(uint64 u) {
        cout `uint $u\n`;
    }

    void print(String s) {
        cout `String $s\n`;
    }

The compiler chooses a function using a two-pass process: the first pass attempts to find a match based on the argument types without any conversions. The second pass attempts to find a match applying conversions whenever possible.

The general order of resolution in both passes is:

So for example, if we called print() with a uint64 parameter, the resolver would check the first print, then check the second print, find a match and use print(uint64 u). If we called it with an int32 parameter, the resolver would try all three functions, and not find a match. It would then repeat the search with conversion enabled and immediately match the first function, because int32 can implicitly convert to int64.

Binary operators ('+', '-', '*' ...) and unary operators ('~', '!', '++' ...) have some additional special steps associated with their resolution, see Operator Overloading for details.

We mentioned searching across namespaces: functions can be defined in most block contexts, including within other functions:

    void outer() {
        void inner(int i) {
            cout `in inner\n`;
        }

        inner(100);
    }

    # we can't call "inner() from here...

If there were another function, "inner(uint u)" defined in the same scope as outer(), the resolver would consider inner(int i) prior to inner(uint u).

Note that it is currently an error to use variables defined in the outer function in the inner function:

    void outer() { int a; int inner() { return a; } } # DOESN'T WORK

Attempting to do this will result in a compile-time error.

[it should be noted that a future version of Crack will support this partially, without assignment, and will also support a limited form of closure]

Functions are Values

Functions are first class values in Crack. That is to say, functions are values with well defined types and can be assigned to variables or passed to other functions. The type of a function is a variation of the built-in function type parameterized with the return type of the function and the types of all of its arguments.

For example, given the following function:

    void f(int a) { cout `got $a\n`; }

We can assign it to a variable and then call that variable:

    function[void, int] g = f;
    f(100); # prints "got 100"

The type function[void, int] is the type of a function returning void and accepting a single integer argument.

This feature can be particularly useful when you want to pass a function to another function. For example, we could define a "map" operation to apply an arbitrary function to a low-level array of integers:

    void map(array[int] data, uintz size, function[int, int] func) {
        for (uintz i = 0; i < size; ++i)
            data[i] = func(data[i]);
    }

    array[int] arr = [1, 2, 3, 4];
    int addOne(int val) { return val + 1; }
    map(arr, 4, addOne);

Some times, passing functions around isn't enough. Some times you need to pass in extra data with a function. Crack also supports "functors" - callable objects. See Functors below for details.

Forward Declarations

Crack is a "single-pass" language. It should be possible for the compiler to generate all code for a module in a single read of a module. That means that in order to use a symbol, the symbol must have already been defined. This causes some problems. For example, you can't just define a pair of recursive functions like this:

    int f(int a, int b) {
        if (a + b > 100)
            return g(a, b);  # ERROR: g() is undefined
        else
            return a + b;
    }

    int g(int a, int b) {
        return f(a - b, b);
    }

If we reverse the order of the funtions, f() will be undefined in the definition of g().

To get around this, Crack allows c-like forward declarations:

    int g(int a, int b);  # declare g()

    int f(int a, int b) {
        if (a + b > 100)
            return g(a, b);  # ok because g() has been declared
        else
            return a + b;
    }

    int g(int a, int b) {
        return f(a - b, b);
    }

Forward declared functions must be resolved by the close of the scope where they are declared. In the example above, if we had not defined g() by the end of the module, we would have gotten an error.

Interpolation Expressions

As noted earlier, Crack uses the backtick as an operator to allow formatted output. This kind of expression is called an "interpolation expression," so named because they interpolate the values of expressions nested within them.

The simplest form of interpolation consists of just a variable name:

    import crack.io cout;
    x := 'test';
    cout `This is a $x\n`;  # prints "this is a test" to standard output.

In order to expand the value of a general expression, a parenthesized expansion must be used:

    a := 10;
    cout `$a * 20 = $(a * 20)\n`;  # prints "10 * 20 = 200"

The 'I' prefix can also be used on the interpolation operator to allow you to format it according to the rules of an indented string (see Strings above):

    cout I`four score
           and seven years ago
           our forefathers ...\n`;

Like everything else in Crack, interpolation expressions are implemented through hooks into the language. See The Formatter Protocol below for details.

Aliases

Any definition in Crack can be aliased - that is, we can specify another name to refer to it. This is done using the alias statement:

    void myLongFuncName() {}
    class MyLongClassName {}

    alias f = myLongFuncName, C = MyLongClassName;

    f();  # equivalent to a call to myLongFuncName()
    C c = {};  # equivalent to creating an instance of MyLongClassName

The alias statement is followed by comma-separated a list of alias definitions of the form "alias-name = definition". A definition can be any variable, function, constant or type.

When an alias is defined for an overloaded function, it becomes an alias for all overloads of that function that exist in that context at the point where the alias is defined. For example:

    import crack.io cout;

    void f(int a) { cout `$a\n`; }
    void f(bool b) { cout `$b\n`; }

    alias g = f;

    void f(String s) { cout `$s\n`; }

    g('test string');

Perhaps unexpectedly, the code above prints "true". "g" is an alias for f(int) and f(bool), but not for f(String) because that function wasn't defined at the point where the alias was created.

Like all other definitions, aliases are scoped to the block context where they are defined.

Aliases can be useful for providing shorter names, but their main value comes from defining alternate names for Generics.

Operators

Crack supports the complete set of C operators. As in C++, they can be used with non-numeric types through Operator Overloading.

Comparison Operators

Comparison operators compare two values and return a boolean.

==

True if the two values are equal. 1 == 1 is true.

!=

True if the two values are not equal. 1 != 2

>

True if the left value is greater than the right value. 2 > 1

<

True if the left value is less than the right value. 1 < 2

>=

True if the left value is greater than or equal to the right value. 2 >= 2

<=

True if the right value is greater than or equal to the left value. 2 <= 2.

is

True if the object on the left is identical (not merely equal) to the object on the right. This isn't defined for numbers, only for aggregates and primitive pointer types. It essentially checks for the equivalence of the pointers.

Basic Arithmetic

All integer and floating point types support the basic arithmetic operators.

+

Add two values. 2 + 2 == 4

-

Subtract two values. 4 - 2 == 2

/

Divide one value by another. 6 / 3 == 2

*

Multiply one value by another

Unary plus and minus are also supported, so we can say:

    x := 2;
    y := 10 + -x;  # y is 8
    z := 10 - +x;  # z is also 8

Operations on constant integers and floating point values are folded in crack, which means that the operations are performed in the compiler and not in the runtime. This is important because you want a constant to remain constant, even if you perform some set of operations on it so that the result of the operation will preserve the adaptiveness of the original constants. For example:

    byte b = 4 + 5;

If we didn't do const folding, the result of "4 + 5" would be of type integer, which would require an explicit conversion to be placed into a byte value.

Bitwise Operators

All of the integer types support the following bitwise operations:

&

Bitwise and. 5 & 4 == 4

|

Bitwise or. 5 | 4 == 5

<<

Shift all bits left by the amount specified on the right. 1 << 2 == 4

>>

Shift all bits right by the amount specified on the right. 4 >> 2 == 1 If this is done on a signed operator, this is an arithmetic shift. Arithmetic shifts preserve the sign of the value shifted.

^

Exclusive or. 5 ^ 6 == 3

~

Bitwise negate.

Like arithmetic operators, bitwise operators are folded. This has some interesting implications for the bitwise negate because a constant like "~0" needs to be able to fit into whatever size integer we want to map it to, yet it is essentially an unsigned value. In order to handle this, Crack invents the concept of a "negative unsigned." Think of a negative unsigned as an infinitely large value whose high bytes are all 1. All of the other binary operations behave according to this rule. What this ends up providing is the ability to fit the result of an operation on constants into an integer type large enough to accomodate the initial significant bits of the inputs:

    byte b = ~0 ^ 5;  # b = 250

Augmented Assignment

All of the binary operators but the comparison operators can be used with assignment to do C-like "augmented assignment." In general, the augmented expression x op = y is equivalent to x = x op y.

So specifically, the augmented assignment operators are: +=, -=, /=, *=, &=, |=, >>=, <<=, ^=.

The Ternary Operator

Like the C family of languages, crack supports the "ternary operator." The ternary operator evaluates to one expression or another based on the results of a boolean expression:

    a = b ? c : d;

If b is true, a will be set to c and d will not be evaluated. If false, a will be set to d and c will not be evaluated..

c and d may be of different types. If they are, the result will be of the same type as c if d is of a type derived from c's type (see Inheritance below) and the same type as d if c is of a type derived from d.

If the types of c and d do not share a common ancestor, the compiler will first attempt to convert d to the c's type. That failing, it will attempt to convert c to d's type. If none of this works, it will finally give an error.

Precedence

Operator precedence is the same as in C. So the rules are (highest precedence first):

The typeof() Operator

typeof() is a special function built-in to the compiler that produces the type of the expression in its argument. For example:

    int a;
    typeof(a) b = a;

Since the variable a in the example is of type int, typeof(a) b declared a variable b of type int.

It should be noted that typeof() determines the type of its argument, but the argument is not evaluated at runtime. So it is safe to pass expressions that would normally have side-effects into typeof(). Likewise, it should be noted that typeof() produces the compile-time type of a value, not its runtime type.

You can use typeof() as another way to avoid explicitly specifying types that you don't really care about. For example:

    typeof(getValue()) val = getValue();
    doSomething(val);
    doSomethingElse(val);

typeof() is particularly useful in macros (see The Standard Annotations) and Generics where type information might not be easily accessible. We can use typeof() in an alias statement to provide names for types in these kinds of situations:

    alias T = typeof(f());  # make T the return type of the function f().

    T getVal();
    void setVal(T newVal);

Classes

Classes are a feature of object oriented programming languages that combine a set of data variables with a set of special functions called "methods." As a simple example of a class, consider the representation of an x, y graphics coordinate:

    import crack.lang Writer;
    import crack.io cout, Formatter;

    class Coord {
        int x, y;

        oper init(int x0, int y0) : x = x0, y = y0 {}
        oper init() {}

        void writeTo(Writer out) {
            Formatter(out) `Coord($x, $y)`;
        }
    }

This class has two "instance variables:" x and y. These get bundled together in a package whenever we create an instance of the class.

The "oper init" syntax creates a constructor, which is a special function that gets called when an instance of the class is created. The constructor performs basic initialization of all of the instance variables. The second "oper init", the one without arguments, is called the "default constructor." As in C++, default constructors get generated automatically if the class has no other defined constructors. If the class does define constructors, and you want a default constructor, you have to specify one explicitly as we've done above.

We can create an instance of Coord like so:

    c := Coord(3, 4);

Alternately, we can use a more C-like syntax:

    Coord c = {3, 4};

Both of these are just different syntactic flavors of the same thing: in both cases we're defining a variable "c" that is a reference to a Coord object that is allocated on the heap. The system initializes this variable by:

Note that all variables of class types are references - they behave very much like pointers in C. So if we were to initialize one variable from another, both variables would refer to the same object:

    c := Coord(3, 4);
    d := c;
    c.y = 5; # d.y is now also 5

This is different from the way that the primitive types behave. Primitive types are always passed "by value." So:

    c := 100;
    d := c;
    c = c + 1; # c is now 101, d is still 100

We can tell if two variables are references to the same object using the special is operator:

    c := Coord(1, 2);
    d := c;
    e := Coord(1, 2);
    if (c is d)
        cout `this will always be printed\n`;
    if (c is e)
        cout `this will never be printed\n`;

Note that identity (the property tested by the is operator) in Crack is a different concept from equality (as tested by the == operator). Two objects have the same identity if their underlying references are equal. However, references to two different object may still be equal if they have the same state (as determined by the cmp() method). In the example above, it might be reasonable to expect that c and e are equal, since they both have values (x = 1, y = 2), although in fact they would not be unless Coord implemented a cmp() method which provided this logic. The cmp() method provided by Object is simply an identity check.

There is a special constant, "null" which allows you to clear these kinds of variables so that they don't reference any object.

    # initialize c to null, then set it conditionally
    Coord c = null;
    if (positive)
        c = Coord(1, 1);
    else
        c = Coord(-1, -1);

You can use the is operator on null values:

    void drawImage(Coord pos, Image img, Coord size) {
        if (size is null)
            copyImage(pos, img);
        else
            stretchImage(pos, img, size);
    }

For classes derived from Object, null values are always treated as false:

    Coord c = null;
    if (!c)
        cout `this will always be printed\n`;

Our Coord class also has a writeTo() method. This allows us to implement the writeTo() method which controls how an Object is written using the back-tick operator. For example:

    cout `$(Coord(10, 20))\n`; # prints "Coord(10, 10)" to standard output.

writeTo() uses the instance variables x and y. One characteristic of methods is that instance variables and other methods can be used without qualification (you don't need a "self" or "this" variable, although this is possible, see below). As another example, we could define a method to give us the square of the distance from the origin as follows:

    int distOrgSquared() {
        return x * x + y * y;
    }

We could then add this information to our writeTo() method:

    void writeTo(Writer out) {
        Formatter(out) `Coord($x, $y) [dist squared = $(distOrgSquared())]`;
    }

Methods also have a special variable called "this". Just as in C++, this refers to the object that the method has been called on. In traditional Object-Oriented parlance, this object is called "the receiver."

We could have rewritten distOrgSquared() as follows:

    int distOrgSquared() {
        return this.x * this.x + this.y * this.y;
    }

The this variable is mainly useful for passing the receiver to other functions.

Classes are Variables

In addition to being compile-time entities, Classes are also variables that can be accessed at runtime. They are of type Class. So, for example, we can do this:

    class Foo {}
    Class foo2 = Foo;
    if (foo.isSubclass(Object))
        cout `Foo is an Object\n`;

Constructors

We mentioned the "oper init" functions earlier. These are called constructors. In Java and C++, constructors are defined using a function that looks like the class name. In the interests of providing uniform syntax for all special methods, Crack uses the "oper" keyword to introduce overloaded operators and special methods, including the constructors and destructors.

Constructor definitions have some special syntax. The return type can be omitted, and you can provide an initializer list for member variables and base classes.

In the example above, we defined two constructors:

    oper init(int x0, int y0) : x = x0, y = y0 {}
    oper init() {}

In the first case, the initializer list initializes the x and y member variables from the arguments x0 and y0. Note that the initializers are specified using assignment syntax: "x = x0" instead of the construction syntax that C++ would have used: "x(x0)".

The construction syntax can be used, too, but it has a different meaning. Construction syntax means "construct the variable with the given arguments." Assignment syntax means "initialize the variable from the given value."

So, for example, "x(x0)" would be equivalent to "x = int(x0)", which is also perfectly legal. The uses for these two types of syntax becomes more obvious when we deal with members that are themselves class instances.

For example, let's say that we want to define a line segment:

    class LineSegment {

        # two coordinates
        Coord c0, c1;

        ## Construct from two coordinates.
        oper init(Coord initC0, Coord initC1) :
            c0 = initC0,
            c1 = initC1 {
        }

        ## Construct from raw x and y values
        oper init(int x0, int y0, int x1, int y1) :
            c0(x0, y0),
            c1(x1, y1) {
        }
    }

In the first constructor, we're using the assignment syntax because we want to bind the objects passed in (initC0 and initC1) to the c0 and c1 variables. If we had instead used construction syntax:

    oper init(Coord initC0, Coord initC1) :
        c0(initC0),
        c1(initC1) {
    }

the compiler would have tried to find a Coord constructor that accepts another Coord object as an argument. Since there is no such constructor, we would have gotten an error. We could have instead done this:

    oper init(Coord initC0, Coord initC1) :
        c0(initC0.x, initC0.y),
        c1(initC1.x, initC1.y) {
    }

This would have called the two argument constructors and created two new Coord objects for c0 and c1. There's an important difference between this and the assignment syntax we started with: with the assignment syntax, c0 and c1 become references to the objects that were passed into them. If we did this:

    Coord c0 = {10, 10}, c1 = {20, 20};
    ls := LineSegment(c0, c1);
    c0.x = 20;  # l.c0.x is now also 20.

changing c0.x in this case also changes the value within ls because the ls's c0 is the same object as the caller's c0. If we had instead used the construction syntax, ls would have had its own copies of the Coord objects, and changing c0's x value wouldn't have had any effect on ls.

If you don't specify an initializer for one of your instance variables, the constructor will initialize the variable based on whatever initializers you gave it in the instance variable definition. So, for example, if we wanted coordinates to default to "-1, -1" for some reason, we could have done this:

class Coord { int x = -1, y = -1; }

As with ordinary variables, null or zero is used if no initializers are specified (null for aggregate types, zero for primitive numeric types).

Initializers are not necessarily run in the order that you specify them: they are run in the order of member definition. So in our examples above, if we had specified an initializer list of ": y = y0, x = x0", x still would have been initialized first.

You can define as many constructors as you want as long as their arguments have different types. This is another example of overloading: the compiler can tell the difference between them from their argument types.

The default constructor is the constructor without any arguments. If you don't define any constructors in your class, the compiler will attempt to generate a default constructor for you - it will generate a constructor that initializes the members with their variable initializers, using their default constructors if there were no initializers.

In future versions of Crack, if a class defines no constructors, it will attempt to inherit all of the constructors of the base classes (see Inheritance).

Inheritance

One important property of object-oriented programming languages is inheritance: the ability to create a new class by extending an existing class. Crack supports inheritance with a syntax similar to that of C++. Let's say that we wanted a coordinate like in our last example, only we also wanted it to have a name. We could create a new class for this:

    class NamedCoord {
        int x, y;
        String name;
    }

but then we'd have to write everything that we wanted to reuse over again in the new class. And every time we fixed a bug in Coord, we'd have to fix the same bug in NamedCoord. Inheritance provides a better way to reuse code:

    class NamedCoord : Coord {

        String name;

        oper init(int x, int y, String name0) : Coord(x, y), name = name0 {}

        void writeTo(Writer out) {
            Formatter(out) `NamedCoord($x, $y)`;
        }
    }

In the example above, we're creating a new class called NamedCoord that is derived from Coord. It will inherit all of Coord's instance variables and methods. We call Coord NamedCoord's base class. NamedCoord is a subclass or derived class of Coord.

In addition to allowing reuse of code, inheritance also has the advantage that instances of the derived class can be used in situations that call for an instance of the base class. So if we had a function that accepted a Coord, we could pass it a NamedCoord:

    void drawLine(Coord c0, Coord c1) { ... }

    NamedCoord c1 = {1, 2, 'c1'}, c2 = {3, 4, 'c2'};
    drawLine(c1, c2);

Note that this is not conversion: instances of NamedCoord are already instances of Coord. As such, function calls passing classes derived from argument types will match in the first resolution pass.

One of the first things we have to deal with in creating NamedCoord is Coord's constructor. Note that in the new initializer list, we have an entry for the base class as well as for the name variable. If we didn't specify a constructor, the compiler would have used the default constructor if there was one.

Like member initializers, base classes are initialized in the order in which they are defined. All base class initializers are run before any of the instance variable initializers for the class. Consider the following example:

    import crack.io cout;

    class A {
        oper init(String name) { cout `initializing $name\n`; }
        oper init() {}
    }

    class B : A {
        A a1, a2;

        # the order of initializers is ignored.
        oper init() : a2('a2'), a1('a1'), A('base class') {}
    }

    # create a temporary instance of B, prints
    B();

This will print the following:

    initializing base class
    initializing a1
    initializing a2

Going back to our NamedCoord example, we also defined another writeTo() method:

    void writeTo(Writer out) {
        Formatter(out) `NamedCoord($x, $y)`;
    }

We did this because Coord's writeTo() method writes out "Coord($x, $y)". We want to write "NamedCoord($x, $y)".

Sometimes you want to call the base class version of a function that is overridden in the derived class. Most often this is used to extend the base class functionality. Crack lets you do this by qualifying the method with the class name. For example, we could have instead overridden writeTo() like this:

    void writeTo(Writer out) {
        out.write('Named');
        Coord.writeTo(out);
    }

Multiple Inheritance

Crack supports multiple inheritance: you can have any number of base classes. With the exception of the special VTableBase class, it is an error to inherit from the same base class multiple times, even indirectly. Eventually, Crack will support this using virtual base classes like in C++.

Member Access Protection

Like other object oriented languages, Crack allows you to hide methods and instance variables that are used internally by a class but not part of its public interface. Like Python, Crack provides this access protection through the use of naming conventions. Unlike Python, Crack's naming conventions cannot be easily circumvented.

Crack gives special access protection to names that begin with an underscore:

As an example, let's consider a Polygon class that includes a list of coordinates:

    class Polygon {
        class Vertex {
            Coord coord;
            Vertex next;
            oper init(Coord coord, Vertex next) :
                coord = coord,
                next = next {
            }
        }

        # first vertex in the list
        Vertex __first;

        # public method to add coordinates.
        void add(Coord c) {
            Vertex v = {c, __first};
            __first = v;
        }

        # protected method to allow derived classes to get a specific
        # coordinate
        Coord _getCoord(int index) {
            cur := __first;
            while (index-- && cur)
                cur = cur.next;

            return cur ? cur.coord : null;
        }
    }

In the Polygon class, the __first instance variable is private - the fact that the sequence of coordinates is implemented as a linked list is an implementation detail of Polygon, and we want to be able to change it without changing the interface and affecting users of the class. It can not be accessed outside of the scope of the class.

The _getCoord() method is protected: it can only be used from within the module or from classes derived from Polygon. This allows derived classes to have special knowledge of the sequence of coordinates without access to the private __first variable.

Destructors

In addition to "oper init" constructors, Crack classes can have destructors. These are called by Object.oper release() when an object's reference count drops to zero. They can also be called explicitly by objects implementing their own memory management strategies.

You can implement the destructor for a class by defining an "oper del" method:

    class Noisy {
        oper del() { cout `Noisy object deleted\n`; }
    }

    Noisy x = {};  # Prints a message when x goes out of scope.

After calling the user defined code, oper del automatically calls oper release on all of the instance variables that have an oper release method (see Reference Counting). It then automatically calls the oper del method of each of its base classes. In both cases, these calls are in reverse order of initialization: first the instance variables in the reverse order that they are defined, then the base classes in the reverse order that they are listed.

Because of all of this automatic destruction, most oper del method don't need to have any user code at all - everything takes care of its own cleanup. If you don't define an oper del method, the compiler will generate one by default.

The only cases where you really need to define an oper del method are in the case of certain external consequences: for example, a File object might want to make sure that its file descriptor is closed upon destruction.

It should be noted that an object must do nothing to change its own reference count during processing of oper del, such as assigning it to an external variable, or inserting it into an external collection. If you do this, the object will still be deleted and the external reference will be invalid. Future versions of Crack will have some degree of protection against this, but for now - don't do it.

Abstract Methods

There are times when you want to require a derived class to provide an implementation for a method. For example, let's say we're implementing a drawing system and we want to have a Shape class with a draw method:

    class Shape {
        void draw() {
            # "shape" doesn't know how to draw itself
        }
    }

    class Line : Shape {
        Coord a, b;
        oper init(Coord a, Coord b) : a = a, b = b {}
        void draw() {
            graphics.drawLine(a, b);
        }
    }

This works, but the problem is that if we create a new shape and forget to implement the draw() method, we don't know about it. We could throw an exception from Shape.draw(), but then we still don't know about it until runtime. We want to be able to say "you can not create an instance of a class derived from Shape without implementing draw()."

This is where abstract methods come in. Abstract methods let you declare a method without a body (sort of like a forward declaration) and require you to implement this method for every class that you wish to instantiate.

Abstract methods are defined using the @abstract annotation. They can only be used in a class that has also been defined as abstract. We would write our Shape class like this:

    @abstract class Shape {
        @abstract void draw();
    }

Now, in order to create a new class derived from shape we must either implement draw() or also declare the derived class as abstract.

Abstract methods are especially useful in Interfaces, described below.

Static and Final Methods

By default, all methods in a class derived from VTableBase are virtual. Since Object is derived from VTableBase, that means that in practice most of the methods that you write are virtual.

This isn't always what you want. For one thing, virtual methods are relatively expensive compared to normal functions. Calling them involves looking up their addresses at runtime from the vtable, which may be overkill if you have no intention of ever overriding them. Furthermore, because the vtable is associated with an instance, a virtual method can not be called on a null value. Finally, there are situations where you may want a function to be scoped to a class, but it isn't really a method: it doesn't need to access this.

To deal with these cases, Crack defines two special built-in annotations: @static and @final. (See Annotations for a more general description of this feature)

@static and @final can be used in front of a method definition to give it special status. @final indicates that the method should not be virtual. This makes the method more like a normal function: no vtable lookup is required, and the receiver can be null. Using @final prevents the method from ever being overridden. If you try to override it in a derived class, you will get an error.

@static effectively makes the method a normal function scoped to the class. As a result, the function can be called without a receiver.

For examples, let's return to our Coord class:

    class Coord {

         # ... methods defined above omitted ...

         ## Returns true if the coordinate is non-null and not the origin.
         @final bool isNonOrigin() {
            return !(this is null) && (x || y);
         }

         ## Returns the length of an x, y position, whether or not it's
         ## wrapped in a Coord object.
         @static int length(int x, int y) {
            # let's pretend we have an integer square root function
            return squareRoot(x * x + y * y);
        }
    }

The Special Base Classes

There are three "special" base classes in Crack:

The first two are available from any Crack code, FreeBase must be explicitly imported from crack.lang.

Object is the default base class for all other classes. If you don't specify any base classes, your class will implicitly be derived from Object. (that's not entirely true: there is a bootstrapping mode in which classes have no default base class, but that's another story).

Object supports a general set of functionality that is applicable to most types, including:

VTableBase is the base class for all classes with a vtable, which is the implementation mechanism of virtual functions. It is a special class that is defined by the compiler, and it has no special contents other than a hidden vtable pointer instance variable.

Object is derived from VTableBase, so by default most methods in Object and all of its derived classes are virtual.

FreeBase is a base class that can be used in cases where you don't want to be derived from Object . FreeBase does not support virtual functions, memory management, or anything you don't put into your derived class. If you're going to use it, you should at minimum figure out how to deal with memory management.

There are situations where you get a base class but you suspect or know that it is a derived class. Like C++, Crack lets you typecast a base class to a derived class using cast() and unsafeCast().

Typecasting is generally deprecated in object-oriented paradigms. However, there are certain situations where it is necessary, and others where it is just the easiest way to get something done.

The cast() function accepts an object as an argument and returns the object cast to its type:

    class A {}
    class B : A {}
    A a = B();
    B b = B.cast(a);

If the object is not actually an instance of the type we are casting to, the cast() function throws a BadCastError.

Sometimes you want to be able to perform some action on a value only if it is a certain type. This can be done by checking the type prior to casting, or by performing the cast followed by the action in a try block, but these approaches both have performance problems. To address this, there is an overload of cast() which accepts a default value. If the value cannot be cast to the type, the default value is returned.

Typically, this is used with a default value of null. For example, a comparison function would typically be implemented as:

    class A {
        String foo;

        int cmp(Object other) {
            if (o := A.cast(other, null))
                return cmp(foo, o.foo);
            else
                return Object.cmp(other);
        }
    }

The cast() function is defined for all classes that derive from VTableBase (including all classes derived from Object). If you attempt to cast an object to a type that it is not an instance of, the program will abort with a (fairly useless) class cast error.

For classes not derived from VTableBase, you can use unsafeCast():

    import crack.lang FreeBase;
    class Rogue : FreeBase {}

    FreeBase f = Rogue();
    Rogue r = Rogue.unsafeCast(f);

Unlike cast(), unsafeCast() does no checking whatsoever - the programmer is responsible for insuring that the object is of the type that he is casting it to. If it's not, unsafeCast() will happily deliver a reference to an invalid object.

For classes derived from VTableBase, you can verify prior to doing an unsafeCast() in the same method that cast() does, by looking at the associated class object:

    Foo obj;
    Coord c = null
    if (obj.class.isSubclass(Coord))
        c = Coord.unsafeCast(c);

Every object derived from VTableBase has a special class attribute - it's like an instance variable, only you can't assign it. It is implemented using a virtual function. The class attribute returns the object's class (recall that classes are also values that exist at runtime). So we could also do something like this:

    Coord c;
    if (c.class is Coord)
        cout `this will always get printed\n`;

Note that you usually don't want to use the is operator to check the class because it's usually acceptable for the class to be either the same as the class you are checking for or derived from the class you are checking for. This is particularly bad for checking the types of exceptions thrown from the standard library, as these may be replaced with derived classes in future compatible versions of the language. Use isSubclass() instead.

Interfaces

As an interim solution to accommodate the lack of virtual base classes, Crack 0.9 provides an interface concept similar to that of Java. In fact, the interface implementation makes it suitable for use as a limited form of virtual base class, but we'll mainly focus on the interface use case.

The crack.ann module provides two special annotations: @interface and @implements (for more general information see Annotations).

To use them, define an interface class:

    @import crack.ann interface, implements;

    @interface Drawable {
        # we don't have to define Drawable as abstract, interfaaces are always
        # abstract.
        @abstract void draw(Canvas canvas);
    }

In the example above, we're defining a Drawable interface that provides a draw() method that generates a runtime error if called.

Now lets create a flavor of our LineSegment class that implements it:

    class DrawableLineSegment : LineSegment @implements Drawable {
        void draw(Canvas canvas) {
            canvas.drawLine(c0, c1);
        }

        oper init(Coord initC0, Coord initC1) : LineSegment(initC0, initC1) {}
    }

We can now pass DrawableLineSegment to any function that accepts Drawable objects without having to worry about doing anything special to accommodate reference counting. That is to say, we can do something like this:

    void myFunction(Drawable x) {
        x.draw();
    }

Of course, we could do this with normal inheritance, too, but that doesn't solve the problem for classes that we don't control (like those provided by an external module), or for cases where we want an object to implement more than one interface.

This approach has some limitations. The @interface and @implementation annotations are really just syntactic sugar for class definitions. @interface generates a class definition from the syntax that follows it and injects three special methods: oper bind(), oper release() and get IFaceName Object() (where IFaceName is the name of the interface, Drawable in the example above). The get IFaceName Object() methods have a return type of Object and they exist to provide an instance of Object for the oper bind() and oper release() methods to delegate to. The get IFaceName Object() methods defined for an interface always return null because interfaces are never derived from Object: they are derived from VTableBase.

@implements does something similar with the implementation class: for every interface class name that follows it (you can have a comma separated list of them) it generates a get IFaceName Object() method that simply returns "this". Implementation classes must therefore derive from Object, either indirectly or directly and they must do so explicitly. So, "class A @implements IFace" would be illegal, you'd have to use "class A : Object @implements IFace" instead.

These annotations are a very weak form of syntactic sugar, as such:

Annotations are actually implemented as abstract classes containing a special method that allows the system to use them as an Object. If you try to inherit from them without using @implements you will get an error like this:

    ParseError: myfile.crk:100: Non-abstract class Bar has abstract methods:
      crack.lang.Object myfile.crk.Foo._iface_getFooObject()

Versions of Crack after 0.9 will continue to provide some form of the @interface and @implements annotations (hopefully a refined form) but will ultimately implement them in terms of virtual inheritance.

Special Methods

Certain methods have special meaning within the language or the standard libraries.

final is used to designate methods that are declared with the @final annotation in crack.lang.Object. As explained in Static and Final Methods, this indicates that the method is non-virtual - even if the class derives from VTableBase, the method will not be turned into a virtual method. As such, the method can not be overloaded. It may also be invoked using a null value as the receiver.

oper init

A constructor.

oper to type

If this method is defined for a type, instances of the class can be implicitly converted to that type. Specifying the return type is optional. If it is specified it must be the same as the type in the name.

oper del

The destructor.

oper bind

(final) Called when an instance of the type is created or assigned to a variable.

oper release

(final) Called when a variable of the type goes out of scope.

oper call

Called when you call the value as if it were a function (see Functors below).

bool isTrue()

Returns true if the object is "true" when converted to a boolean. This is a virtual function defined in Object that is called for non-null values by oper to bool(). It allows derived classes to easily override conversion to bool.

int cmp(Object other)

Compare the object with another object. Return a value that is greater than zero if the receiver is greater than other, returns a value less than zero if it is less than other, and returns zero if the two objects are equal.

If you implement this, all of the normal comparison operators ("==", "!=", "<", ">", "<=" and ">=") will work for you.

void writeTo(Writer writer)

Write the receiver to writer. This is used to allow the object to write itself in its most natural representation - whatever that means for the object type.

void format( type object)

This method is used by the back-tick operator to format objects of specific types in specific ways. See The Formatter Protocol.

void append( type object)

This method is used to construct a sequence constant if it is available. See Sequence Constants and The Sequence Constant Protocol.

Operator Overloading

The oper keyword originated as a short form of the "operator" keyword in C++ which is designed to allow you to define your own implementation of the operators (e.g. "+", "-", ">" ...).

The following operators can be overloaded:

oper +( type other)

Binary plus.

oper -()

Unary negate.

oper -( type other)

Binary minus.

oper *( type other)

Binary multiply.

oper /( type other)

Binary divide.

oper %( type other)

Binary remainder.

oper []( type index)

Array element access.

oper []=( type index, type value)

Array element assignment.

oper --()

Unary pre-decrement (post-decrement, pre-increment and post-increment don't exist yet, not sure why this one does).

oper !()

Unary boolean negate.

oper ~()

Unary bitwise negate.

oper ==( type other)

(final) Binary "equals." Object implements this as "cmp(other) == 0".

oper !=( type other)

(final) Binary "not equals." Object implements this as "cmp(other) != 0".

oper <( type other)

(final) Binary "less than." Object implements this as "cmp(other) < 0".

oper <=( type other)

(final) Binary "less than or equal to." Object implements this as "cmp(other) <= 0".

oper >( type other)

(final) Binary "greater than." Object implements this as "cmp(other) > 0".

oper >=( type other)

(final) Binary "greater than or equal to." Object implements this as "cmp(other) >= 0".

oper |( type other)

Bitwise or.

oper &( type other)

Bitwise and.

oper <<( type other)

Left shift.

oper >>( type other)

Right shift.

oper ^( type other)

Exclusive or.

oper op =( type other)

(all Augmented Assignment operators). If these exist, they will be called when the augmented assignment operators are used. If they are not defined, they can still be used if the type defines the simple operator that it is based on. So for example, if a class defines "oper +", you can use the += operator on an instance without defining it.

oper call

The function call operator: implementing this makes your objects callable using the argument list of the operator definition. You can declare "oper call" multiple times with different argument types to make your object behave like an overloaded function.

As in the last section, final means the method is non-virtual for Object derivatives and cannot be overridden.

The primitive types mostly have intrinsic implementations of the operators.

Certain operators can not be overloaded:

All of the binary operators have corresponding "reverse operators." For example, oper r+() is the reverse operator of oper +(). Reverse operators are used to check for an overload on the right operand of a binary expression.

Binary operations have special resolution rules based on the normal overload resolution order. When trying to find a match for a binary operation, the compiler:

Each of these steps uses the existing method resolution rules as defined above in Functions and below in Method Resolution in Classes.

Unary operators also have a special resolution rule: the compiler checks for a unary method named for the operator with no arguments prior to checking for a function with a single argument in the enclosing namespaces.

Functors

If a class defines the special oper call method, it is possible to call an instance of the class with the same syntax that you would use to call a function. For example:

    class Action {
        void oper call(int arg) { ... }
    }

    Action a = {};
    a(100);

This ends up calling the oper call method.

This sort of pattern is commonly known as a "function object" or simply a "functor." This feature will be expanded in future versions of the language to provide implicit conversion from normal functions to functors.

As it stands, there are a set of generic interfaces (see Generics below) that make it easier to work with functors with up to five arguments. These are defined in the crack.functor module.

For example, let's say we have a Scheduler class that simply performs actions at a specified time. We could use a functor returning void with no arguments to represent our actions:

    import crack.functor Functor0;

    @import crack.ann implements;

    class Scheduler {
        void schedule(Time time, Functor0[void] func) { ... }

        void run() { ... }
    }

    class Alarm : Object @implements Functor0[void] {
        void oper call() {
            cout `Time to wake up!\n`;
        }
    }

    Scheduler s = {};
    s.schedule(Time('10 AM'), Alarm());

Functor0 is a "functor with zero arguments." If it were a two argument functor we would use Functor2:

    class CompareX : Object @implements Functor2[int, MyObj, MyObj] {
        int oper call(MyObj a, MyObj b) {
            return cmp(a.x, b.x);
        }
    }

Having to derive a class every time you want to do this can be tedious, so the crack.functor module also provides a matching set of FunctionN generics. These provide a concrete implementation of FunctorN that wraps a plain function. So we could have implemented our alarm like this:

    import crack.functor Functor0, Function0;

    ...

    void alarm() {
        cout `Time to wake up!\n`;
    }

    Scheduler s = {};
    s.schedule(Time('10 AM'), Function0[void](alarm));

Alternately, we could have added a convenience overload to Scheduler to do the conversion for us:

    class Scheduler {
        void schedule(Time time, Functor0[void] func) { ... }
        void schedule(Time time, function[void] func) {
            schedule(time, Function0[void](func));
        }

        void run() { ... }
    }


    ...

    Scheduler s = {};
    s.schedule(Time('10 AM'), alarm);

Method Resolution in Classes

When resolving an overloaded method, Crack uses the same rules as for normal function resolution: check each method in each namespace in the order defined, then do the same in the parent namespaces. If no result is found, repeat with conversions. The only exception is that overrides or implementations of virtual functions are not considered in the method resolution order.

For classes, "parent namespaces" are the base classes. So if we have:

    class Base {
        void func(B b) {}
        void func(A a) {}
    }

    class Derived : Base {
        void func(C c) {}
        void func(A a) {}
    }

when we try to resolve func(val), the compiler will check:

Note that Derived.func(A a) is not checked: this is because it is just an override of Base.func(A a). Crack ignores overrides when considering method resolution. If it didn't, it would be impossible to override a function without also matching more specific overloads defined in the base class. For example, imagine that if, in the example above, B were derived from A. Matching Derived.func(A a) would hide the more specific Base.func(B b) which is probably not what you want.

Forward Declarations of Classes

As with functions, some times we want to reference a class before it is defined. We can forward declare a class in the same way as a function:

    class A;

    @abstract class B {
        @abstract void useA(A a);
    }

    class A {}

There are some heavy restrictions on what you can do with forward declared classes. You can't call any methods on them, you can't instantiate them and you can't even define variables to be of that type. About the only things that you can do with them is use them as argument types and pass those arguments to other functions. However, these things are sufficient for defining interfaces (as in the example above) which is usually all you need to bootstrap these kinds of collaborations.

Generics

In strongly typed languages like Crack, it is highly desirable to be able to express a type in terms of other types. For example, if we have an array container, we want to be able to define an "array of integers" or an "array of strings." Without this feature, you need to do a lot of typecasting when extracting an object from the array.

Crack provides this feature in the form of generics. A generic is a class that can accept other types as parameters, similar to the way that the primitive built-ins array and function do.

You define a generic like any other class definition only with a parameter list:

    class Pair[FirstType, SecondType] {
        FirstType first;
        SecondType second;

        oper init(FirstType first, SecondType second) :
            first = first,
            second = second {
        }
    }

In this example, we have defined a Pair generic that is simply a holder for two variables, first and second, each of which can have their own type.

To construct a Pair of an integer and a string:

    p := Pair[int, String](100, 'string value');

You can use a Pair[ t1 , t2 ] specification anywhere a type is allowed. When such a specification is encountered, the Crack compiler instantiates the generic for its parameter types by actually compiling the code of the generic with its parameters aliased to the types provided. It only does this the first time it encounters the generic - after that it just imports the original generic.

Generics in Crack are essentially macros. When they are defined, the contents of the generic class is simply recorded. When instantiated, that recording is played back in an "ephemeral module" containing:

Because of this approach, compile-time errors in generics do not manifest until the generic is instantiated.

Generic classes also support inheritance. Using the above example we can derive a class PrimitivePair from Pair as follows:

    class PrimitivePair[FirstType, SecondType] : Pair[FirstType, SecondType] {

        oper init(FirstType f, SecondType s) : Pair(f, s) {}

        oper +=(FirstType f){
            first += f;
        }
    }

Modules

We've been making casual use of the import statement throughout this document. The import statement is used to import symbols from modules, for example we've use it to import the global variable cout from the crack.io module:

    import crack.io cout;

The general format of the import statement is:

    import  module-name  name-list;

module-name is a dot-delimited module name. name-list is a comma separated list of functions, variables and classes defined in the module that you wish to import into the current namespace. A name can also have the form "local-name = source-name", allowing you to import a definition under a different alias. This feature is typically used to avoid name collisions.

For example, let's say that we had two modules that both define classes names "Document." We could use both types in the same module by importing them with aliases:

    import acme.xml.dom DOMDocument = Document;
    import libre.word WPDocument = Document;

Module names correspond directly to directory and file names in the Crack "library path." When resolving a module name, the system:

So for example, to load the crack.lang module for the first time we:

The crack library path is specified with the "-l" option values on the command line. By default, the executor inserts the $PREFIX/lib/crack$VERSION path and the current directory into the beginning of the search path.

Variables defined in the module top-level are not released until program termination. Cleanups are called in the reverse order of definition.

Access Protection

Not all symbols can be imported. Formally, you can only import public symbols that are defined in the module that you are importing them from.

A "public symbol" is an identifier that doesn't begin with an underscore. Identifiers beginning with a single underscore are classified as "module protected." These symbols can only be used within the module where they are defined and (if they are class-scoped) from within derived classes (see Inheritance below). You can't import module protected symbols.

You are also limited to importing symbols that are actually defined in the module that you are importing them from. Crack doesn't allow "second order imports." For example, if module x imports function f() from module y, module z may not import f() from module x. This is explicitly disallowed to avoid the problem of "leaky imports," where a programmer (often accidentally) imports low-level symbols from a higher level module, subjecting their code to breakage if the implementation of the higher level module changes and it no longer imports the low-level symbol.

There are times when you want to allow other modules to import a second-order symbol. For example, sometimes you want to set up a "convenience module" that consolidates a group of entities from a disparate collection of other modules. You can do this by explicitly marking the symbols as safe for import using the @export_symbols annotation:

    import x a;
    import y b;

    @export_symbols a, b;  # a and b can now be imported from this module.

Note that this mechanism can not be used to make module protected symbols importable. To import a symbol, it must still be public. To offer a non-public symbol for import, you must define an alias.

Aliases also circumvent the second order import rule: any public alias is effectively added to the exported symbols list for the module, making it appear as though it were defined in the module itself. This feature is particularly useful for creating aliases for generics:

    import crack.cont.hashmap HashMap;

    class MyObj {}
    alias MyMap = HashMap[String, MyObj];

We can now import MyMap from other modules, providing them with a more abbreviated name for the type and insulating them from implementation changes.

Protocols

There are certain syntactic conventions in crack that map to specific compile time interfaces - that is, the compiler will translate these kinds of statements or expressions into a set of method calls, partially depending on whether these methods are defined. These special methods are similar to Interfaces but they are strictly relevant at compile time and as such do not rely on virtual methods for their implementation. We call these method sets protocols.

The language elements that currently make use of protocols are the for/in statement, the string interpolation expression and sequence construction.

At this time, there is no way to formally indicate that a type implements a protocol: if a type provides the necessary methods, it is considered to implement the protocol and can be used in the relevant context.

The Iteration Protocol

The following for/in statement:

    for (x in container)
        cout `$x\n`;

translates to roughly the following code:

    for (tempIter := container.iter(); tempIter; tempIter.next()) {
        x := tempIter.elem();
        cout `$x\n`;
    }

Note that the tempIter variable is purely illustrative. There is an iterator variable generated, but it is hidden so as not to clash with any user defined variables.

For a class to be iterable using for/in:

The Formatter Protocol

As we've shown, the back-tick operator allows us to do formatted output of static data, variables and expression values:

    int a;
    cout `a = $a, a + 1 = $(a + 1)\n`;

See Interpolation Expressions above for details on what this means. The interpolation expression above is equivalent to the following code:

    if (cout) {
        cout.enter();
        cout.format('a = ');
        cout.format(a);
        cout.format(', a + 1 = ');
        cout.format(a + 1);
        cout.format('\n');
        cout.leave()
    }

The enter() and leave() methods are optional - they are called if they are present. If the leave() method exists, its return value is the result value of the interpolation expression. If not, the original target (cout, in this case) is the result.

The cout variable is defined in crack.io as an instance of Formatter. Interpolation expressions are not limited to use with Formatter, they can be used on any object that supports conversion to boolean and format() methods for all of the values in the expression. For example, we could create our own formatter that could be used in the expression above:

    class SumOfInts {
        int total;

        ## ignore static strings.
        void format(StaticString s) {}

        ## make integer formatting add the value to the sum.
        void format(int val) { total = total + val; }

        ## initialize to zero
        void enter() { total = 0; }

        ## return the total
        int leave() { return total; }
    }

    SumOfInts sum;
    result = sum `a = $a, a + 1 = $(a + 1)\n`;

    # result is 2a + 1

More often when doing this, you'll want to derive from Formatter and extend its functionality:

    import crack.io Formatter;

    ## Formatter that encloses strings in quotes.
    class StrQuoter : Formatter {

        oper init(Writer w) : Formatter(w) {}

        ## implemented so we don't quote StaticString
        void format(StaticString s) { rep.write(s); }

        ## Write strings wrapped in quotes.
        void format(String s) {
            rep.write('"');
            rep.write(s);
            rep.write('"');
        }
    }

    String s = 'string value';

    # wrap standard output's underlying writer with our formatter and use it
    # to format the value.
    StrQuoter(cout.rep) `value is $s\n`;

Note that we had to reimplement format(StaticString) in the example above. The static content in an interpolation expression is of type StaticString like all string constants in crack. If we had not defined format(StaticString), the normal format method would have been used for the "value is " string (this is because of the current resolution order of methods: it will be changed in a future version of the language so that we don't have this problem).

You can create your own Formatter objects given a Writer object. There are already a few specializations of this class in the crack.io module.

StringFormatter allows you to construct a string using a formatter:

    import crack.io StringFormatter;

    f := StringFormatter();
    f `some text`;
    s := f.createString();  # s == "some text"

It's often useful to be able to format a string in an expression. For example, throwing an exception like this would be unwieldy:

    if (foo > MAX_FOO) {
        StringFormatter out = {};
        out `Value of foo out of bounds: $foo`;
        throw AssertionError(out.createString());
    }

It would be much cleaner to format and generate the string within the argument list of AssertionError. FStr allows us to do this. FStr creates a new string formatter for every interpolation expression and returns the created string from its "leave()" method. So we could replace the code above with:

    if (foo > MAX_FOO)
        throw AssertionError(FStr() `Value of foo out of bounds: $foo`);

The Sequence Constant Protocol

Defining a sequence constant translates to the construction of an object and the insertion of a set of elements into that object. For example, the definition:

    array[int] a = [1, 2, 3];

Is equivalent to the following code:

    array[int] a = array[int](3);
    a[0] = 1;
    a[1] = 2;
    a[2] = 3;

Likewise, this code generates a linked list and iterates over it:

    for (elem :in List!['foo', 'bar'])
        cout `got $elem\n`;

is roughly equivalent to this:

    List temp = {};
    temp.append('foo');
    temp.append('bar');
    for (elem :in temp)
        cout `got $elem\n`;

The "temp" variable is here for purely illustrative purposes, no named variable is actually defined.

When a sequence constant is defined, the compiler does the following:

For each element between the brackets, the compiler:

This approach allows all sequence types to easily implement sequence constants.

Reference Counting

Reference counting is a simple form of memory management. Every object is assigned a reference count, which is essentially the number of other objects or variables referencing the object. When a new reference is added, the reference count is increased. When a reference is removed, the reference count is decreased. When the reference count drops to zero, the destructor is called and the object's memory is released.

Crack's reference counting mechanism is actually implemented in the language as part of the implementation of Object in the crack.lang module. The compiler uses two special hooks - the "oper bind" and "oper release" methods - to notify an object when a reference is being added (by calling "oper bind") and released (by calling "oper release"). These methods are implicitly non-virtual: they cannot be overridden by a derived class, do not make use of the vtable and therefore they can be safely applied to null objects.

It is possible to implement the bind and release methods in classes derived from FreeBase or VTableBase to implement your own memory management. For example, the Wrapper class in the (now deprecated) crack.exp.bindings module uses it oper release to always free the Wrapper instance when it is released, allowing it to essentially exist in the scope in which it is defined. Note that if you were to pass such an object out of that scope, the results would be undefined.

For efficiency, Crack does not bind and release every time you might expect: for one thing, objects passed as function arguments are not bound and released for the function call - we know that the external caller has a reference to these objects. The called function can simply borrow them.

Crack also has the notion of "productive" and "non-productive" expressions. A productive expression is one that produces a reference. A non-productive expression simply borrows an existing reference. Variable references are always non-productive. Functions returning values are (almost) always productive.

The compiler will call oper bind when assigning a non-productive value to a reference, or when returning a non-productive value. It will call "oper release" when a variable goes out of scope or when productive temporary value is cleaned up. In general, temporaries get cleaned up at the end of the outermost expression. For the "&&" and "||" operators, temporaries get cleaned up for the secondary expression prior to cleanup of outer expressions.

There's one thing you need to be aware of about reference counting: the mechanism is susceptible to the problem of reference cycles - this is when an object directly or indirectly references itself. When this happens, the entire cycle of objects can become unfreeable, potentially resulting in a memory leak. This is because each object retains a reference from the last object in the sequence, so even when all external references are removed, none of the objects will drop to a reference count of zero.

There's currently no good way around this: you just have to be aware that if you create a reference that can introduce a cycle, you'll need to take certain remedial measures to avoid leaking the objects. This is typically accomplished by breaking the cycles at some point, normally during the destruction of some external object that references the cycle without participating in it.

Primitive Bindings

Crack allows you to directly import and call functions from shared libraries. A special variation of the import statement allows you to import symbols from a shared library:

    # import malloc() and free()
    import "libc.so.6" free, malloc;

After doing this, it is necessary to provide declarations of the functions you've imported:

    byteptr malloc(uint size);
    void free(byteptr val);

You can then use them like any other function:

    mem := malloc(100);
    free(mem);

Many C functions require special arguments like pointers to integers. These can be passed using primitive arrays:

    # import "free()"
    import "libc.so.6" free;
    void free(voidptr mem);

    # import C function "void doSomething(int *inOutVal)"
    import "somelib.so" doSomething;
    void doSomething(array[int] inOutVal);

    # call it
    v := array[int](1);
    v[0] = 100;
    doSomething(v);

    # clean up our array
    free(v);

The crack.exp.bindings defines an Opaque class. This can be used for structures returned from C functions that contain no user-serviceable parts. For example:

    import crack.exp.bindings Opaque;
    import "libFoo.so" Foo_Create, Foo_Destroy;
    class Foo : Opaque {}

    # create a Foo instance, then destroy it.
    foo := Foo_Create();
    Foo_Destroy(foo);

Opaque doesn't attempt to free the object, so it is important that you manage the object correctly yourself.

Sometimes C functions want to accept a function pointer to use as a callback. You can get this effect by defining a function and using a parameter type of voidptr for the callback parameter:

    import "libFoo.so" Foo_SetCallback;
    void Foo_SetCallback(Foo obj, voidptr callback);

    void myCallback(Foo obj) { cout `callback called\n`; }
    Foo_SetCallback(Foo_Create(), myCallback);

This won't work for overloaded functions: the compiler won't be able to tell which overload to use.

Crack's current approach to bindings is not without its problems:

The primitive import mechanism exists mainly to facilitate quick hacks. For anything more significant than that, create an extension instead (see Extensions).

Annotations

Annotations are a meta-programming mechanism: they essentially allow you to extend the Crack compiler in Crack. The annotation system is very much a work in progress: much remains to be done with it. That said, you can still use it to do some very impressive things.

As a simple example, lets say that we want to define a macro that expands to write a marker to standard output. In module myann we could define:

    import crack.compiler CrackContext;

    void writeMarker(CrackContext ctx) {
        # the built-in annotations @FILE and @LINE refer to the current
        # filename and line number (something like "myann.crk" and 7, in this
        # case).
        ctx.inject(@FILE.buffer, @LINE, 'cout `marker\\n`;'.buffer);
    }

From another module, we can use the macro by doing a compile-time import of it and invoking the annotation:

    @import myann writeMarker;

    # equivalent to 'cout `marker\n`;'
    @myann

In myann, we define the writeMarker() function, which accepts a CrackContext object as its sole argument. CrackContext is an interface to the compiler. We can use it to inject text, read and inject tokens, set callbacks from the compiler, emit errors and warnings and create other annotations.

CrackContext and all of the other objects defined in crack.compiler are fairly primitive: they are defined before the basic types (String and Object) even exist. As such, all of these interfaces must be built up from the primitive types. That's why we pass @FILE.buffer and 'cout marker\n;'.buffer to inject instead of just @FILE and 'cout marker\n;'. CrackContext.inject() accepts a byteptr argument. The buffer instance variable is a byteptr that points to the raw character data of the string.

The first and third arguments to inject() must also be null terminated. That means that the data must end with a zero byte value (this is the native way that strings are represented in C). All static strings in Crack happen to be null terminated, so we can easily do this with a static string. If we wanted to do the same with a constructed string we'd have to do something to guarantee that the string were null terminated (converting it to a CString would work, but there are often cheaper ways to accomplish this).

Using an annotation requires some special syntax. First, we import it using the @import statement. @import is just like import except that it imports the module at compile time into the annotation namespace. Symbols in the annotation namespace can be invoked with the syntax "@" symbol. symbol must refer to a function accepting a CrackContext object as its argument.

An annotation is invoked at compile time immediately after tokenization of the symbol.

Here's a more complicated example involving reading tokens. In this example, we process a simple variable definition and generate a getter and a setter for it:

    import crack.compiler CrackContext;

    void attr(CrackContext ctx) {
        # get the next token, assume it is a type
        type := ctx.getToken();
        if (!type.isIdent()) ctx.error(tok, 'Identifier expected');

        # get the attribute
        var := ctx.getToken();
        if (!var.isIdent()) ctx.error(tok, 'Identifier expected');

        # get a closing semicolon
        tok := ctx.getToken();
        if (!tok.isSemi())
            ctx.error(tok, 'semicolon expected after attribute definition');

        # get the token text - note that like all other strings in this
        # interface, these are of type byteptr, not String
        typeText := type.getText();
        varText := var.getText();

        # format and inject code (note that we add a null character at the end)
        StringFormatter fmt = {};
        fn := @FILE; ln := @LINE; fmt `
            $typeText __$varText;

            $typeText get_$varText() { return __$varText; }
            void set_$varText($typeText val) { __$varText = val; }
\0`;
        ctx.inject(fn, ln, fmt.createString().buffer);

In addition to injecting full strings, you can also store single tokens: see the documentation in the header files in the compiler directory of the source tree for details.

When doing injection, one thing to keep in mind is that single tokens and blocks of injected text will be parsed in reverse order of how they were inserted: so if we inject block A and then B, the parser will read the contents of B and then of A. The tokens within an injected block are not in reverse order (the inject function takes care of this) but the blocks themselves are.

You generally don't want to import annotation modules using the normal import. The crack.compiler module, which is needed for pretty much all annotations, does not exist at runtime for AOT compiled code, only for JIT, so you will not be able to compile your program to a stand-alone executable if you ignore this rule.

Inspecting Parser State

CrackContext provides two functions for inspecting parser state: these are getScope() and getParseState(). getScope() returns one of SCOPE_MODULE, SCOPE_FUNCTION or SCOPE_CLASS depending on whether the innermost enclosing context is within a module, function or class.

getState() currently only returns an indicator as to whether the parser is in the "base state." A return value of STATE_BASE indicates that we are not currently in the middle of parsing a definition or statement. For example, in the following code:

    int x;
    for (x = 0; x < 100; ++x)
        cout `$x\n`;

Annotations found immediately before the int, for and cout words and after the final semicolon would find the parser in the base state. Annotations anywhere else would not be in the base state.

A return value of STATE_OPT_ELSE indicates that we've completed parsing an if statement and the next thing might be an else clause.

These functions can be used in conjunction with parser callbacks to insure that an annotation used to modify a definition or statement precedes the right kind of syntactic construct.

Here's an example of an annotation that verifies that it has been used in the base state of a class:

    void checkBaseState(CrackContext ctx) {
        if (ctx.getScope() != SCOPE_CLASS ||
            ctx.getParseState() != STATE_BASE &&
            ctx.getParseState() != STATE_OPT_ELSE
            )
            ctx.error('checkBaseState can only be used in a class definition '
                       'outside of a nested method or instance variable '
                       'definition.'.buffer
                      );
    }

Registering Parser Callbacks

The addCallback() and removeCallback() methods allow you to register and deregister parser callbacks. The parser calls these callbacks at certain points in the subsequent code.

Like annotations, callbacks are called with a CrackContext object as their only argument.

The following callbacks are available:

PCB_FUNC_DEF

Called immediately after the opening parenthesis of the parameter list of a function definition.

PCB_FUNC_ENTER

Called immediately after the opening curly brace of a function definition.

PCB_FUNC_LEAVE

Called immediately before the closing curly brace of a function definition.

PCB_CLASS_DEF

Called immediately after the "class" keyword in a class definition or forward declaration.

PCB_CLASS_ENTER

Called immediately after the opening brace of a class definition.

PCB_CLASS_LEAVE

Called immediately prior to the closing brace of a class definition.

PCB_VAR_DEF

Called immediately after the assignment operator, semicolon, or comma following a variable definition.

PCB_EXPR_BEGIN

Called immediately before parsing the outermost expression in a statement or the initialization clause of a for loop.

PCB_CONTROL_STMT

Called immediately after the keyword signifying a control statement (while, for or if).

As stated earlier, we can combine parser state with a callback to insure that an annotation is placed in a certain location in the code. The following code creates a funcMod annotation that can only be called prior to a function definition:

    Array[Callback] callbacks;

    void deregisterCallbacks() {
        for (cb :in callbacks)
            removeCallback(cb);
    }

    void good(CrackContext ctx) {
        deregisterCallbacks(ctx);
    }

    void bad(CrackContext ctx) {
        deregisterCallbacks(ctx);
        ctx.error('@funcMod can only be used before a function '
                   'definition'.buffer
                  );
    }

    void funcMod(CrackContext ctx) {

        if (ctx.getScope() != SCOPE_CLASS ||
            ctx.getParseState() != STATE_BASE
            )
        ctx.error(" annotation can not be used here (it must precede a "
                   "function definition in a class body)".buffer
                   );

        callbacks.append(ctx.addCallback(PCB_FUNC_DEF, good));
        callbacks.append(ctx.addCallback(PCB_CLASS_DEF, bad));
        callbacks.append(ctx.addCallback(PCB_EXPR_BEGIN, bad));
        callbacks.append(ctx.addCallback(PCB_CONTROL_STMT, bad));
    }

Function Flags

The parser contains a function flag register that can be used by an annotation to set flags on function definitions that follow it. For example, we could implement the @static built-in annotation as follows:

    import crack.compiler CrackContext, FUNCFLAG_STATIC;

    void static(CrackContext ctx) {
        ctx.setNextFuncFlags(FUNCFLAG_STATIC);
    }

The only other function flag supported at this time is FUNCFLAG_FINAL.

Error Contexts

Sometimes it is useful to cause the parser to print additional information with an error message. For example, if you get a syntax error in a macro, you would ideally like to see the location within the macro that caused the error as well as the location where the macro was invoked.

You can do this with error contexts. Error contexts are string messages that are printed on the line following the original error message. There can be as many lines of error context as you want, they are stored as a stack and the last context is printed first.

Error contexts are pushed using CrackContext.pushErrorContext(). They can be removed from the stack either by calling CrackContext.popErrorContext() or by putting back a special token of type TOK_POPERRCTX. The latter causes the error context to be popped the next time the token is read, which is useful if your annotation injects a sequence of tokens and then returns - the error context will remain active until after your sequence of tokens is parsed.

As an example, let's say that we have registered beginClass() and endClass() as the PCB_CLASS_ENTER and PCB_CLASS_LEAVE callbacks. We could add the message "in a class!" to the error message with the following code:

    void beginClass(CrackContext ctx) {
        ctx.pushErrorContext('in a class!'.buffer);
    }

    void endClass(CrackContext ctx) {
        ctx.popError();
    }

An annotation can register other annotations. For example, if we wanted to create an annotation to define our beginClass() and endClass() annotations, we could do this:

    void registerAnnotations(CrackContext ctx) {
        ctx.storeAnnotation('beginClass'.buffer, beginClass);
        ctx.storeAnnotation('beginClass'.buffer, endClass);
    }

The new annotations are scoped to the lexical context from which they are called - for example, if registerAnnotation() is called from the top-level block of a function, the annotations will only exist within the scope of the function.

When registering an annotation, it is often useful to associate the annotation with user data. For example, the following example is a very weak macro facility. @record binds the next token to an identifier, when the identifier is used as an annotation it expands to its value:

    import crack.compiler CrackContext, Token;

    void _playback(CrackContext ctx) {
        tok := Token.unsafeCast(ctx.getUserData());
        ctx.putBack(tok);
    }

    void record(CrackContext ctx) {
        # get the identifier (error checking omitted)
        ident := ctx.getToken();

        # get the token to attach to it
        val := ctx.getToken();

        # register the identifier as an annotation, store 'val' as user data.
        ctx.storeAnnotation(ident.getText(), _playback, val);

        # VERY IMPORTANT: need to bind a reference to the user data so it
        # doesn't get deallocated
        val.oper bind();
    }

We could use it like this:

    @record var 'some string';
    String x = @var;

Note that we perform oper bind() on the value token after storing it with the annotation. This prevents the token from being garbage-collected when record() terminates. User data is a voidptr, not an object, and therefore it can not be managed. We also have to use an unsafeCast() to restore it to a Token.

We can access existing annotations with CrackContext.getAnnotation(). Annotation objects contain the following access methods:

    voidptr getUserData();
    byteptr getName();
    voidptr getFunc();

We've demonstrated obtaining and injecting tokens with the getToken() and putBack() methods. We can also create our own tokens:

    import crack.compiler CrackContext, Token, TOK_STRING;

    # annotation to convert the next token to a string
    void stringify(CrackContext ctx) {
        tok := ctx.getToken();
        ctx.putBack(Token(TOK_STRING, tok.getText(), tok.getLocation()));
    }

Usage would be as follows:

    String x = @stringify test;

Details of the annotation interface can be found in the header files in the crack/compiler directory installed in your include tree.

Built-in Annotations

Crack defines the following special built-in annotations:

@final

Marks a class method as final.

@static

Marks a class method as static. (See Static and Final Methods above)

@abstract

Marks a class or method as abstract. (See Abstract Methods above)

@encoding

Identifies the source file's encoding. (See Encoding below)

@FILE

Expands to a string containing the current filename.

@LINE

Expands to an integer containing the current line number.

The Standard Annotations

The crack.ann module defines a set of standard annotations. Two of them are @interface and @implements where are documented above in Interfaces. The others allow you to define macros. Crack macros are similar to C preprocessor macros with some improvements.

To define a macro for use within a module, simply use the @define annotation:

    @import crack.ann define;

    @define max(Type) {
        Type max(Type a, Type b) {
            return a > b ? a : b;
        }
    }

    int a = 3, b = 5;
    x := @max(a, b);   # x becomes 5

When defining a macro, the identifier after the @define annotation is the macro name. The argument list follows, then the body of the macro enclosed in curly braces.

Defining a macro creates a new annotation with the macro name. Macro annotations parse an argument list that follows them and then expand the macro with the arguments. Macros are scoped to the context in which they are defined - so if you define a macro in the body of a class, it can only be used from within that class.

When a macro is expanded, all of the tokens within the curly braces are expanded into the location of the macro. All macro arguments are expanded to the values passed in for those arguments.

Macros also set error contexts for the span of their expansion - if you get a syntax error in the body of the macro, the error message will report the location of the error within the definition of the macro, followed by the location of the annotation that expanded the macro.

As in C macros, you can do argument concatenation and stringification. A single dollar sign in a macro stringifies the following argument, a double dollar sign concatenates the argument with the adjacent tokens.

For example, if we wanted to define a macro to produce command-line flags, we might do something like this:

    @define flag(Type, name) {
        Type flag_$$name = Type$$Flag($name);
        flags.addFlag(flag_$$name);
    }

    @flag(int, port);

This would generate the following code:

    Type flag_port = intFlag('port');
    flags.addFlag(flag_port);

By default, macros are limited to the modules that they are defined in. To make a macro available to other modules, you have to export it:

    @import crack.ann define, export, exporter;

    # Indicates that the module will be exporting macros.
    # What this actually does is to import various utility functions from
    # crack.ann needed to do an export.
    @exporter

    @define myMacro(a, b) { ... }
    @export myMacro

We can then import the macro as an annotation to another module:

    @import mymodule myMacro;

    @myMacro(1, 2)

Assertions

crack.ann also defines an @assert annotation that can be used to verify that a given expression is true:

    @import crack.ann assert;
    
    @assert(2 + 2 == 4);

@assert raises an AssertionError if the condition is false with a string containing the location of line and a representation of the failing expression.

Structs

crack.ann also defines a @struct annotation that can be used to generate a very limited class with a constructor that allows you to initialize all of its member variables. For example:

    @import crack.ann struct;
    
    @struct Coord { int x; int y; }
    Coord c = {10, 20};

Structs are very limited as of Crack 0.9. In particular:

Annotations in Generics

There are limitations on the ways that you can use annotations with generics. Generics are implemented as a simple stream of language tokens that are replayed by the compiler when the generic is instantiated. Unfortunately, annotations can affect parser state in ways that can not always be passed through to the instantiation. For this reason, there are limitations on the kinds of mutations that can be passed in from the context of a generic to the code within the generic. The only thing that is preserved are the imports.

So this code would not work:

    @import crack.ann define;
    @define func() { void f() {} }
    
    class A[T] {
        @func()   # func does not exist!
    }

Likewise, registering parser callbacks, error contexts or new annotations will not affect the instantiated generic code. The only way to do so is to perform all mutations within the scope of the generic. So, for example, we could have successfully written our last example like this:

    @import crack.ann define;  # Imports are preserved.
    
    class A[T] {
        @define func() { void f() {} }
        @func()
    }

In this case, define is passed through (because it's an import) and func will be defined within the generic at the time of its instantiation.

Extensions

In addition to the approach for calling C functions identified in Primitive Bindings, Crack supports a formal extension concept allowing you to load specially crafted shared libraries as if they were Crack modules.

When importing a module, if the executor is unable to find a native Crack module in the search path, and if there is a shared library with that name on the search path, and if the shared library defines a pair of initialization functions corresponding to the module name, the shared library is loaded as an extension module, and the initialization function is called at load time.

Initialization functions must have a name corresponding to the canonical name of the module. There are two of them, the "compile init" function and the "runtime init" function. The convention for forming their names is to join all of the elements of the canonical name with underscores and then append either "_cinit" (for the compile-time function) or "_rinit" (for the runtime function) to the result. So for the extension module foo.bar.baz, the initialization functions would be named foo_bar_baz_cinit and foo_bar_baz_rinit.

Initialization functions should be C++ functions declared as 'extern "C"'. The compile-time init function accepts a parameter of type crack::ext::Module *. The role of the compile-time initialization function is to populate the module object with the module's interface. To describe it another way, this initialization function configures everything that is necessary to import the module at compile time. The compile-time initialization function is not called for extensions loaded from an AOT compiled program, use the runtime-initialization function for this purpose.

The runtime initialization function is called at runtime during the initial load of the module (only once). Note that when running in JIT mode, both the compile-initialization and runtime-initialization functions are called.

For example, let's say that we want to provide a binding for a C function called myfunc():

    void myfunc(char *data) { printf("my data: %s", data); }

Our init function (again, assuming the module is foo.bar.baz) would be as follows:

    #include <crack/ext/Module.h>
    #include <crack/ext/Type.h>
    #include <crack/ext/Func.h>

    extern "C" void foo_bar_baz_cinit(crack::ext::Module *mod) {
        // define a function returning void
        Func *func = mod->addFunc(mod->getVoidType(), "myfunc", (void *)myfunc);
        // add the "data" argument, parameters are the type and the parameter
        // name
        func->addArg(mod->getByteptrType(), "data");
    }

    extern "C" void foo_bar_baz_rinit() {
        // do module runtime initialization.
    }

The details of the extension interface are documented in the header files in the crack/ext directory installed with your distribution. To compile your extension, you'll want to:

The Extension Generator

Creating extensions by hand is way too much work. In the interests of simplifying it we have the crack.extgen module. This defines a @generateExtension annotation that hijacks the compiler to generate a source file defining the extension. Its usage is best illustrated by example:

    @import crack.extgen generateExtension;

    # generate an extension that will be imported as 'foo.bar'
    @generateExtension foo.bar {

        # name of the source file to generate.
        @filename "foobar.cc"

        # code to inject into the extension source file
        @inject '#include "FooBar.h"\n';

        # function accepting a char *
        void puts(byteptr string);

        # function accepting a float and an integer pointer
        int hairy(float val, array[int] result);

        # opaque type and a function that uses it.
        class MyType;
        void myFunc(MyType val);

        # constants (must be integer or float types)
        const int
            # with no value it will be set to the value of the C constant
            SAME_NAME_AS_C_CONSTANT,

            # when defined from an identifier, the identifier is the C
            # constant
            SIMPLE_NAME = LESS_AESTHETIC_NAME_OR_VALUE,

            # when assigned from an integer, the value is the integer
            ONE_HUNDRED = 100,

            # a string value can be used to indicate a complex expression
            SIMPLE_NAME = 'ONE_HUNDRED >> 1';

        # @ifdef lets you define bindings based on preprocessor values (there
        is also an @ifndef)
        @ifdef FOO_FEATURE_X {
            int useFeatureX();
        }
    }

Numeric Types

The rules with which Crack deals with numeric types are complicated but predictable.

The general philosophy is that the Platform Dependent Numeric Types (PDNTs, which are int, uint, intz, uintz and float) should be easily usable in most cases where the programmer cares more for performance and compatibility with C libraries than for precision. For this reason, implicit conversions to PDNTs are allowed from all other numeric types and PDNTs are said to "dominate" in binary operations, meaning that the type of the result of a binary operation involving a PDNT will be the type of the first PDNT (from left to right) in the operation.

The Universal Numeric Types (UNTs, which are byte, int32, uint32, int64, uint64, float32, and float64) are intended for use in situations where the programmer cares very much about precision. You can implicitly convert to a PDNT only in cases where no loss of precision is possible.

In binary operations (for example '+', '-', '*' ...) involving multiple numeric types, PDNTs are said to "dominate." That is, if one operand is a PDNT and the other is a UNT, the the PDNT flavor of the operation is always matched. So float32(5) + int(5) is of type int.

If both values in a binary expression are PDNTs, the type of the left-most operand dominates, so float(5) + int(5) is of type float.

Note that integer and floating-point constants, although they default to the corresponding PDNT types in situations where type cannot otherwise be inferred, do not dominate - so an expression like: int32(val) + 1 is of type int32.

All of this behavior is implemented using the normal Crack method resolution and conversion rules. The trick is that PDNT binary operations are implemented as methods and reverse methods and UNT binary operations are implemented as functions in the default namespace. UNT operations are also defined in order of smallest to largest types, so binary operation involving two UNTs will match the first operation with a type large enough to accommodate both operands.

As an example, when resolving int64(a) + int(b):

On the other hand, let's consider int64(a) + byte(b):

As a special exception, we don't check for methods or reverse methods when performing binary operator resolution on constants: doing so would cause constants (whose default types are PDNTs) to dominate. This would lead to silly results like float64(a) + 1 producing a result of type int.

Threading

Crack provides rudimentary support for multi-threading. Writing thread-safe programs is difficult in any sufficiently primitive language, and crack is no exception.

Crack's reference counting mechanism is thread-safe, however it's bind and release semantics are not: there is no guarantee of order of operations when it comes to assigning reference counted variables, and without proper synchronization it may still be possible to get into a situation where you are referencing illegal memory.

When sharing objects between threads, always be sure to do one of the following:

Follow these rules diligently and you won't have any problems. Keep in mind that module-scoped globals are very easy to share accidentally.

See Threads for information on the crack.threads module used to support threading.

Debugging

Crack has only minimal support for debugging in 0.9. If your program seg-faults or aborts, you can at least get a sparse stack-trace by running it in JIT mode under a fairly recent version of GDB (7.0 or later).

Encoding

Crack scripts are essentially ASCII-compatible binary data. Symbols, keywords numerics and whitespace are ASCII characters, other elements can utilize byte values from 0x80 to 0xFF. Specifically, comments, and all types of strings can contain any bytes whatsoever (of course, the delimiter and escape character have special meanings, as does the dollar sign for interpolated strings). Identifiers treat the high byte values 0x80-0xFF in the same way as alphabetic characters - an identifier may include these at any position.

These features allow you to use any ASCII compatible encoding for Crack scripts. To identify the encoding for tools like editors and web browsers that care about encodings, the language features a built-in "encoding" annotation. This annotation has no meaning to the compiler, it is simply a formal declaration of the encoding. It must be followed by a string identifying the name of the encoding. For example, to indicate that a script uses UTF-8 encoding, one might begin the script like this:

    #!/usr/bin/env crack
    @encoding 'utf8'

    // script contents...

The encoding annotation should be either the first or second line of the script. If a script or module doesn't specify an encoding, tools are free to attempt to infer it from the contents of the script. In the absence of high-byte values, the encoding is implicitly ASCII.

Appendix 1 - Libraries

Crack comes with its own (sparse but growing) set of standard libraries. These are loosely organized as the modules under crack and crack.exp. crack.exp includes modules that are designated as "experimental." These have interfaces that are likely to change as Crack matures. In some cases, these are older, deprecated libraries that may be removed entirely. The other libraries are also changeable, but should be frozen by version 1.0.

Special Language Types

Strings and Buffer Types

Strings are derived from Buffer. A buffer is just a byteptr (stored in the instance variable buffer) and a size (stored in the instance variable size).

The memory that a buffer references is presumed to be read-only, but nothing in the language enforces this. For cases where a writable buffer is desired, use something derived from a WriteBuffer subclass. WriteBuffer inherits from Buffer, but the read-only requirement is relaxed: it is legal to modify the buffer of a WriteBuffer.

Most output functions accept a Buffer, most input functions accept a WriteBuffer. For cases where you want a WriteBuffer that frees its own buffer memory, use a ManagedBuffer.

Constant strings are actually of type StaticString. This is a class for strings with buffers that are not to be deleted (because static strings can reference data in read-only memory segments). Constant strings are always guaranteed to be null terminated, making them suitable for use with low-level C functions defined in extensions and primitive bindings. This is not true of strings or buffers in general, see CString for a more general solution.

Like any object, a buffer can be converted to a bool. A buffer converts to true if it has a non-zero size.

Any two buffers can be compared - a byte-for-byte comparison is performed. If one buffer is identical to the beginning of the other, but is shorter, the shorter buffer is "less than" the larger buffer.

The String class is one of the few types that don't need to be imported. Buffer and its other descendants can be imported from crack.lang.

CString

When dealing directly with C functions expecting null terminated strings, we often need to convert a Crack string to a null-terminated value. CString is one way to do so. Given an arbitrary buffer type, CString will create a copy of the buffer and insure that there is a null terminator at buffer[size] (note that the size of a CString excludes the byte for the null terminator).

This allows us to safely do something like this:

    import runtime strcpy;

    String userInput = getUserInput();
    data := byteptr(userInput.size + 1);

    strcpy(data.buffer, CString(userInput).buffer);

ManagedBuffer

A managed buffer is a WriteBuffer that manages its underlying buffer memory. These are designed for use with IO operations. The typical use case is to read into it and then convert it to a string, either by copying the underlying buffer or by passing ownership of it to the new string:

    # create a 1K managed buffer.
    ManagedBuffer buf = {1024};

    # read it, store the size of what we read
    buf.size = cin.read(buf);

    # convert it to a string and take ownership of the buffer (the second
    # argument of the constructor is "takeOwnership")
    String s = {buf, true};

Note that Reader includes a utility method that does this more intelligently (it only transfers ownership if the amount read is at least 75% of the buffer size):

    # 's' is a string.
    s := cin.read(1024);

There is also an AppendBuffer which is a managed buffer that will grow as you add data to it.

SubString

The SubString class provides a lightweight string that references the buffer of an existing string. You can create one with the slice() and substr() methods of a normal string (or of another SubString).

slice() and substr() are very similar, but they have slightly different semantics. slice(a, b) returns the substring between positions 'a' and 'b' in the string (inclusive for 'a', non-inclusive for 'b'). substr(a, b) returns the substring starting at 'a' of length 'b'. Both methods can omit the second argument, in which case the remainder of the string starting at 'a' is returned, and both allow you to provide negative offsets from the end of the string.

Examples:

    data := 'sample string';

    # all of these assign the SubString 'str' to s
    s := data.slice(7, 10);
    s = data.substr(7, 3);
    s = data.slice(-6, -3);
    s = data.substr(-6, 3);

    # both assign the SubString 'string' to s
    s = data.slice(7);
    s = data.substr(7);

You can also create a substring explicitly:

    import crack.lang SubString;

    s := SubString('this is a test', 10, 4);

SubString is derived from String, so you can use it in the same way that you would a string without the cost of managing and copying a portion of the buffer.

Standard Exceptions

The following standard exception types are defined in crack.lang:

Exception

The exception base class. Generally all exception types should derive from this. It provides stack trace functionality.

BadCastError

Thrown by the cast() function when used on an object that is not of the specified type.

AssertionError

Thrown when an internal invariant is broken. This should generally indicate a bug in the module that throws it.

IndexError

Thrown when an array operation is passed an invalid index (greater than or less than the number of elements).

InvalidResourceError

Thrown when an operation is performed on a resource that does not exist or is not appropriate for this kind of action (such as trying to open a directory for read).

InvalidStateError

Thrown when an operation is performed on an object that is not in an appropriate state for the operation (such as trying to write to a closed file).

InvalidArgumentError

Thrown when a function is passed an invalid argument.

Containers

Containers provide support for the basic sequential and mapping data structures expected from a modern programming language. Crack's container library is defined in a set of modules in crack.cont. Each module is named for the container generic that it provides, for example, high-level arrays are in crack.cont.array and the array class itself is called Array.

All containers have a count() method that returns the number of elements in the container. They also convert to boolean based on whether or not they are empty:

    c := createContainer();
    if (c)
        cout `container has $(c.count()) elements\n`;
    else
        cout `container is empty\n`;

Iterators

Iterators are like iterators in Java. All container types have an iter() method which returns an Iterator object for the container.

Iterators allow you to iterate over the set of objects in a container one at a time. As an example, consider an array:

    Array[ElemType] arr = createArray();

    for (i := arr.iter(); i; i.next())
        cout `got $(i.elem())\n`;

arr.iter() creates an iterator over the array initialized at the first item. An iterator is "true" for as long as there are elements remaining in the collection. next() forwards the iterator to the next element, and elem() returns the element associated with the iterator.

Iterators conform to The Iteration Protocol, and as such can be used more succinctly in a for loop:

    for (elem :in arr)
        cout `got $elem\n`;

Arrays

Arrays are a collection that preserves element order with fast random-access assignment and retrieval. Unlike their low-level counterparts, the are safe for general use. They manage both the size of the underlying array and the reference counts of the elements.

To construct an array with the expected number of elements:

    import crack.cont.array Array;
    Array[String] arr = {10};  # 10 element array of Strings

The number of elements specified is the array capacity - this is the number of elements that can be added before it is necessary for the array to reallocate its underlying, low-level array. It is not the size of the array. If you attempt to access arr[0] in the example above, you would get an IndexError.

Like other containers, arrays have a count() method that returns the actual number of elements in the array. At the time of construction, the count is zero.

To add an element to an array, use the append() method:

    arr.append('first element');
    arr.append('second element');
    cout `count = $(arr.count())\n`;  # writes "2"

Note that append() will occasionally be an O(n) operation: if we don't have capacity for a new element, append() will reallocate the array to one twice as big.

To get an element in an array, use the bracket operator:

    cout `elems: $(arr[0]), $(arr[1])\n`;

You can also replace an existing element in an array using element assignment:

    arr[1] = 'new second element';

Note that this only works to replace an element: arr[2] = 'something' would result in a runtime error.

Finally, like all containers, you can iterate over the elements of an array:

    for (i :on arr)
        cout `elem: $(i.elem())\n`;

It should be noted that there is a specialization of Array[String] called StringArray defined in the crack.strutil module. In addition to the standard Array functionality, it's contains methods for obtaining a primitive array and for joining the array into a single delimited string.

Linked Lists

The List class implements a linked list. Linked lists aren't very good for random access, but they do support constant time insert and append, making them preferable to arrays in certain cases.

The List interface looks very much like the Array interface:

    import crack.cont.list List;

    List[String] l;

    # add some elements
    l.append('first');
    l.append('second');

    # iterate over them
    for (elem :in l)
        cout `got element $elem\n`;

Random access lookup, delete and insert are all available, although they are all O(n) operations:

    cout `$(l[1])\n`;       # prints "second"
    l.delete(0);            # deletes 'first'
    l.insert(0, 'first');   # reinserts 'first'

You can also push a new element onto the front of the list (equivalent to insert(0, ...) but terser and slightly faster):

    l.pushHead('zero');

pushTail() is also available as a synonym for append().

Likewise, you can pop items off the head of the list:

    elem := l.popHead();  # after the last operation, elem == 'zero'

popTail() can not be implemented efficiently: if you need this, use a DList.

Doubly-Linked Lists

The DList class implements a doubly-linked list. DList provides some additional functionality over List and can facilitate faster operations, but at the cost of higher memory usage (each DList element requires an additional pointer). DList is part of the crack.list module.

DList supports inserting and deleting the element referenced by an iterator:

    # all sequence types can be initialized with a sequence constant.
    DList[String] dl = ['first', 'delete me', 'temp', 'before me'];

    for (i :on dl) {

        # delete the 'delete me' string from the list
        if (i.elem() == 'delete me') {
            dl.delete(i);

        # insert 'inserted' before 'before me'
        } else if (i.elem() == 'before me') {
            dl.insert(i, 'inserted');
            i.next();  # skip the item we just inserted
        }
    }

After insert, the iterator points to the new element. After delete, it points to the element after the deleted element.

DList also supports a bi-directional iterator:

    # get a bi-directional iterator - an argument of "true" causes
    # the iterator to be initialized to the end of the list.  "false" would
    # start it at the beginning.
    i := dl.bidiIter(true);
    while (i) {
        cout `$(i.elem())\n`;
        i.prev();
    }

You can use a bi-directional iterator everywhere you can use a normal iterator.

In addition to the popHead() function, DList supports a popTail() function:

    DList dl;
    dl.append('first');
    dl.append('second');
    elem := dl.popTail();  # elem == 'second'

TreeMap

A "map" or an "associative array" is a container that stores a set of values each indexed by a key. Both keys and values can be arbitrary types. The Crack library provides both hashtable and red-black tree map implementations. Red-black trees provide a natural sort order, and provide O(log n) insertion and lookup with constant time rebalancing.

To create red-black tree map:

    import crack.cont.treemap TreeMap;

    # maps are defined with the types of the key and the value.
    map := TreeMap[String, String]();

To add elements:

    map['first'] = '1';
    map['second'] = '2';
    map['third'] = '3';

To access them:

    cout `$(map['first'])\n`;  # writes "1"

Iteration is the same as for arrays, except that the elements are KeyVal objects. As their name suggests, KeyVal objects have a key and val attribute:

    for (kv :in map)
        cout `map[$(kv.key)] = $(kv.val)\n`;

HashMap

A HashMap provides the same interface as TreeMap, but is backed by a hashtable instead of a red-black tree. Hashtables should provide significantly faster inserts and lookups (generally O(1), although insertions will occasionally be O(N) when table grows beyond its capacity and both insertions and lookups can be a multiple of constant time in cases of hash collisions). The downside is that they do not preserve the order of their keys. If you iterate over a hashtable the order of elements returned is undefined.

Since the interface is the same as that of TreeMap, we won't go over it in detail except to provide an example of how it is constructed:

    import crack.cont.hashmap HashMap;

    HashMap[String, int] map = {};
    map['first'] = 100;
    map['second'] = 200;

Algorithms (Sort Functions)

The crack.algorithm module includes two sorting algorithms for arrays. For example:

    import crack.cont.array Array;
    import crack.algorithm QuickSort, InsertionSort;
    Array[int] arr = getAnArray();

    # try out both kinds of sort
    QuickSort[Array[int]].sort(arr);
    insertionSort[Array[int]].sort(arr);

For aggregate types, sorting relies on the comparison functions of Object, which in turn rely on the overridable cmp() method. For primitive types, the type must define the comparison operators.

Legacy Error Handling

Crack 0.9 continues to provide an error handling module (crack.exp.error). However, this interface is deprecated in favor of exceptions. This documentation should be regarded as purely of historical interest.

The error module lets you record an error in a manner that can be controlled by the callers. The default action is to abort.

Here's an example of how we might use it to verify a parameter:

    import crack.exp.error err;

    Object checkForNull(String context, Object val) {
        if (val is null)
            err.do() `$context got a null argument`;
        return val;
    }

err.do() returns a formatter that writes to a writer stored in the err object. When this formatter is destroyed, it will call err.finish() which calls abort(), terminating the program, if err.fatal is true. If err.fatal is false, err.gotError is set to true and the program continues.

To prevent a function from aborting the program when an error occurs, we can use the ErrorCatcher class:

    import crack.exp.error err, ErrorCatcher;

    void myFunc(Object arg) {
        catcher := ErrorCatcher();
        checkForNull("myFunc", arg);
        if (catcher.gotError())
            cout `We got a null and don't want to die: $(catcher.getText())\n`;
    }

When you create an ErrorCatcher, it sets error.fatal to false and sets error.writer to an internal StringWriter, causing the error handler to have no visible effect. The caller can then check to see if there was an error from the catcher, and obtain the error text from the catcher's getText() method. When the catcher is destroyed, it restores the error handler to its previous state.

It is not advisable to use this mechanism for errors that can conceivably indicate something other than a programming error. For example, it would not be advisable for a file interface to call a fatal error for a file not found. Better to use a lightweight return code and let the caller decide whether this represents a programming error.

As a convenience, the crack.exp.error module also provides a strerror() method. strerror() returns the error text of the last error that occurred in the C library.

The strutil Module

crack.strutil contains utility functions for working with strings that have external dependencies making them unsuitable for inclusion in the String or Buffer classes themselves.

    import crack.strutil split, StringArray;

    # create a StringArray, which is a class derived from Array[String] only
    # containing a little extra functionality.
    StringArray arr = ['first', 'second', 'third'];

    # concatenate all of the elements together, separated by a space
    text := arr.join(' ');  # text = 'first second third';

    # split them backk apart
    arr2 := split(text, ' ');  # arr2 = ['first', 'second', 'third']

The ascii Module

The Crack language strives to be encoding-neutral as much as possible. That's why the String class and the crack.strutil modules generally avoid providing functionality for dealing with whitespace or capitalization. Nevertheless, there are times when you care about encodings, and there's no encoding more ubiquitous than ascii. Therefore, we include this kind of functionality in the crack.ascii module:

    import crack.ascii strip, toUpper, radix;

    # strip trailing and leading whitespace
    a := strip('  this is a string   ');  # a = 'this is a string'

    # uppercase it
    b := toUpper(a);  # b = 'THIS IS A STRING'

    # obtain the ascii representation of a number in a given base (base 16, in
    # this case)
    c := radix(255, 16);  # c = 'ff';

Program Control (sys)

crack.sys contains symbols for interacting with the executable context. It defines the exit() function and argv variable.

The exit() function can be used to terminate the program at any point with the given exit code:

    import crack.sys exit;

    # terminate with the normal code.
    exit(0);

The argv variable is a StringArray instance that allows you to access the command line arguments:

    import crack.sys argv;

    # write out all of the args except the program name (argv[0])
    uint i = 1;
    while (i < argv.count()) {
        cout `arg $i = $(argv[i++])\n`;
    }

The env variable is a HashMap containing the environment variables. It can also be used to change environment variables:

    import crack.sys env;
    path := env['PATH'] + ':/opt/my/programs';
    env['PATH'] = path;

Input/Output

The crack.io module contains crack's basic input/output interfaces. The Reader and Writer classes are the core interfaces for reading and writing data. These make use of the Buffer hierarchy and are implemented as interfaces so that they can be combined with each other and other classes.

The crack.io module defines three global variables: cin, cout, and cerr. These are wrappers around the system standard input, output and error streams. cin is a kind of Reader (an FDReader, to be precise) and cout and cerr are both Formatters. Formatter, in turn, implements Writer, so we can use these streams to illustrate the Reader and Writer interfaces.

Writer has one salient method called write(). This method writes a buffer to the underlying output object:

    cout.write('some data');

Since String is derived from Buffer, we can use the write() method to write a constant string. Classes implementing Writer must implement the write() method.

Reader provides two methods: an efficient method that reads into a WriteBuffer and a heavier form that reads a buffer of specified size and returns a string.

    ManagedBuffer buf = {1024};  # ManagedBuffer is derived from WriteBuffer
    bytesRead = cin.read(buf);  # read up to 1024 bytes into 'buf'

read(WriteBuffer) doesn't modify the size of its input buffer. It does return the number of bytes read. It is the responsibility of the caller to change the size of the buffer if desired.

We could have done something similar with the heavy-weight form:

    String data = cin.read(1024);

This is more expensive than read(WriteBuffer) because it actually allocates a buffer and a String object.

We could implement the most basic functionality of the cat command like this:

    ManagedBuffer data = {4096};
    while (data.size = cin.read(data)) {
        cout.write(data);
        data.size = 4096;
    }

cin, cout and cerr are implemented using FDReader and FDWriter. These classes implement Reader and Writer to read from and write to a file descriptor. You can obtain a file descriptor from any of the low-level IO functions on your system ("open()", for example).

The crack.io module also provides the Formatter class. See The Formatter Interface for details on how to use this.

Threads

The crack.threads module provides high-level thread functionality. It includes the Thread, Mutex, MutexLock, Condition and Queue classes.

To create a thread, derive from the Thread base class and implement the run() method:

    import crack.threads Thread;

    class MyThread : Thread {
        void run() {
            # Note that cout, cin and cerr are threadsafe: their only state is 
            # a file-descriptor.
            cout `hello from the background!\n`;
        }
    }

We can then start use start() and join() to start the thread running in the background and wait for it to complete:

    MyThread thread = {};
    thread.start();
    
    # block until completion
    thread.join();

The simplest synchronization primitive is the atomic_int type. atomic_int is an integer (an intz, actually, because it is the size of a pointer) whose only operations are performed atomically. Atomic operations are visible to all threads and are not subject to reordering by the compiler. They are used to implement the reference counting mechanism in Object, and can also be used to implement other forms of thread-safe counters and control mechanisms. For example, here is a simple active thread counter:

    atomic_int count;
    
    class MyThread : Thread {
        void run() {
            count += 1;
            ... do thread actions ...
            count -= 1;
        }
    }

The only operations supported for atomic_int are:

Mutexes

Mutexes synchronize access to shared resources. Only one thread can have a mutex locked at any given time. If a thread tries to lock a mutex that is currently locked by another thread, it will block until the mutex becomes available.

The Mutex class provides the lock() and unlock() methods:

    int value;
    Mutex valueMutex = {};
    
    valueMutex.lock();
    value = 100;
    valueMutex.unlock();

There is also a MutexLock class that manages locking and unlocking a mutex for the context it is defined:

    void f() {
        # The mutex will be unlocked when this goes out of scope and is 
        # deleted at the end of the function call.
        lock := MutexLock(valueMutex);
        value = 200;
    }

Note that MutexLock is rather expensive, as it involves a memory allocation and free. However, it also has the virtue of being exception safe.

Conditions

Conditions allow you to send events between threads. They must be used in conjuntion with a Mutex. The mutex protects a shared resource, the notifies observers of changes in that resource:

    # Create a condition associated with our value.
    Condition cond = {valueMutex};
    
    # Change the value.
    if (true) {
        lock := MutexLock(valueMutex);
        value += 1;
        cond.signal();
    }
    
    # Thread that waits on changes.
    class Waiter : Thread {
        void run() {
            lock := MutexLock(valueMutex);
            while (true) {
                # The condition atomically releases the mutex while it's 
                # waiting for an event.
                cond.wait();
                
                cout `value changed, new value = $value\n`;
            }
        }

Queues

Queue is the most sophisticated inter-thread communication mechanism provided by crack.threads. As its name implies, it is a thread-safe message queue. It is also a generic.

Here's how we could use Queue to implement a worker pool:

    Queue[Functor0[void]] actions = {};
    class WorkerThread : Thread {
        void run() {
            func := actions.get();
            func();
        }
    }
    Array[WorkerThread] pool = {};
    for (int i = 0; i < 10; ++i) {
        thread := WorkerThread();
        pool.append(thread);
        thread.start();
    }
    
    void doSomething() {
        cout `blah`;
    }
    actions.add(Functor0[void](doSomething));

Line Readers

The crack.readers module provides a LineReader class that lets you read from a writer a line at a time:

    import crack.readers LineReader;

    reader := LineReader(cin);
    String line = null;
    while (line = reader.next()) {
        cout `got line: $line\n`;
    }

The next() method returns null when there is no more data to read.

Dealing with the Filesystem

The crack.fs module provides tools for working with the filesystem. It allows you to both manipulate filesystem meta-data and to do file IO.

Eventually, crack.fs will support a virtual filesystem allowing each program to have its own configurable view.

The primary interface of crack.fs is the Path class. Instances of Path correspond to entities in the filesystem, whether or not they currently exist.

By way of an example, to check for the existance of a file and write it if it doesn't exist, we could do something like this:

    import crack.fs makePath, Path;
    Path p = makePath('myfile.txt');
    if (!p.exists())
        p.writer().write('Sir, I exist!');

makePath() creates a new Path object from a path string in a way that is familiar to most programmers: the path string can be absolute or relative to the current working directory.

The more idiomatic way to do this would have been to use the "cwd" object:

    import crack.fs cwd, Path;

    Path p = cwd/'myfile.txt';

Path objects overload "oper /" to do path concatenation. We don't generally recommend overloading an operator in a way that provides different semantics from its normal meaning, but the forward slash is such an intuitive way to join paths together that we make an exception for it. It should be used with a Path instance on the left side and a string on the right.

The cwd object is a Path object representing the current directory. It can also be used to set the current directory with a special set() method:

    cwd.set('/home/weezer');

The string passed to set() can be either an absolute or relative directory. There is also an overload that accepts another Path object. The specified directory must exist - attempting to change to a non-existent directory will result in an exception.

In addition to file operations, Path objects can be used to create directories, remove files and directories and (as seen above with exists()) obtain status information.

Files and Directories (the Old Way)

The crack.exp.file module is the deprecated module for file access. It contains two classes that provide a basic interface for manipulating files as objects, including obtaining file information and simple reading and writing.

FileInfo

A FileInfo object can be constructed from a String, which should contain a full path name (where the file does not have to exist). The class will provide methods for obtaining information on a file (if it exists) and manipulating file and path information. If the file exists, information will include size, owner and group information, file permissions, and the like. Regardless of file existence, file information such as such as glob matching, basename, and dirname will be available.

Currently, however, the only implemented methods are matches, for matching a file name against a pattern such as '*.txt', basename to return the file name portion of a full path (optionally stripping extension), and dirname for returning just the directory portion of a full path.

Example:

    fi := FileInfo('/etc/resolv.conf');
    if (fi.matches('*.conf'))
        cout `it's a conf file!\n`;
    basename := fi.basename(true); // strip extension
    // basename contains a string 'resolv'
    basename := fi.basename(false); // don't strip extension
    // basename contains a string 'resolv.conf'
    dirname := fi.dirname();
    // dirname contains '/etc';

File

The File object can be used for reading and writing to files on disk. It extends FileInfo and so all informational functionality available with that class is also available to File.

A File should be constructed with the full path to the file and the mode to open in, which is one of 'r' or 'w' for read or write, respectively. If the file is opened in read mode, a LineReader is automatically created which allows for reading the file line by line via the nextLine method. Note that the trailing newline is include in the return value.

Read Example:

    f := File('/etc/resolv.conf', 'r');
    String lineBuf = null;
    lineNum := 1;
    while (lineBuf = f.nextLine()) {
        cout `$lineNum: $lineBuf`;
    }

When opened in write mode, a file may be written to by passing a String to the write method:

    f := File('/tmp/myfile.txt', 'w');
    f.write("lorem ipsum rock");

Note, there is currently no append mode; if the file already exist, it will be overwritten upon opening in write mode.

File objects may be closed with the close method. This is done automatically when the File object destructor runs (if it hasn't been closed manually).

Directory

crack.exp.dir (also deprecated) contains the Directory class, used to iterate through a directory hierarchy. A Directory object can be constructed by passing the full path of a directory to the constructor. If the path is valid, you can iterate through the list of directories and files contained in the directory.

You do this by calling the dirIter and fileInfoIter methods. They will both return an Iterator object. A dirIter Iterator will iterate through Directory objects, while a fileInfoIter will iterate through FileInfo objects. Like all uses of Iterator currently, you must cast these objects yourself in the calling code.

For example, to recursively scan a directory for a file pattern:

void scanForScripts(Directory dir) {

    Iterator i;
    pattern := "*.crk";

    FileInfo curFile = null;
    i = dir.fileInfoIter();
    while (i.nx()) {
        curFile = FileInfo.cast(i.elem());
        if (curFile.matches(pattern)) {
            cout `found crack script file: $curFile\n`;
        }
    }

    // recurse to directories
    Directory nextDir = null;
    i = dir.dirIter();
    while (i.nx()) {
        nextDir = Directory.cast(i.elem());
        scanForScripts(nextDir);
    }

}

When a Directory object is created, it canonicalizes the name by stripping a trailing path separator (i.e. "/") if it exists. If you need a version with the trailing separator (for example, to build a full path name with string concatenation), you can call nameWithTrailing.

Process

Crack provides a method for executing and controlling sub-processes and retrieving their output via the Process class, which is located in crack.process

You run a new process by constructing a Process class with the full command line to execute. If successful, you can retrieve the process ID with getPid().

Once running, you can poll() the process to find its status, or wait() for the process to finish execution. Once finished, you can call getReturnCode() for the final return code.

To retrieve stdout and stderr output from the process, use getStdOut() and getStdErr().

Alternately, you can use the run() method and pass the process a handler to handle standard input and standard error, or add the process and a handler to a Poller to multiplex it with other IO (see Networking below).

Regular Expressions

Crack provides a regular expression library in the form of crack.regex. You use it by creating a Regex object:

    import crack.io cin, cout;
    import crack.io.readers LineReader;
    import crack.regex Regex, Match;

    rx := Regex('(\\w+)=(.*)');
    String line = null;
    LineReader src = {cin};
    while (line = src.next()) {
        Match m = rx.search(line);
        if (m)
            cout `got $(m.group(1)) = $(m.group(2))\n`;
    }

The Regex.search() method returns a Match object if there was a matching substring and null if there wasn't. The Match object allows you to get the entire text of the matched substring, the start and end positions of it, and also allows you to get this information for parenthesized subgroups (employed in the example above).

We uses values of 1 and 2 to access the subgroups: the zeroth subgroup is the text of the entire expression.

To get the start and end position of the matched substring:

    uint startPos = m.begin();
    uint endPos = m.end();

Likewise, we can do this with subgroups:

    uint start1 = m.begin(1);
    uint end1 = m.end(1);

Note again that the zeroth subgroup (m.begin(0)) is equivalent to the entire group, so we start with group 1.

We can also use named subgroups. For example, we could have written our expression like this:

    rx := Regex('(?P<var>\\w+)=(?P<val>.*)');

And then the output statement would look like this:

    cout `got $(m.group('var')) = $(m.group('val'))\n`;

Likewise, the begin() and end() functions can be used with group names.

Named subgroups can greatly enhance the readability of regular expression code.

crack.regex is a wrapper around the PCRE library (Perl-compatible regular expressions). As the name suggests, the regular expression syntax supported by this library is very close to the syntax supported by Perl 5.

Math

The crack.math library provides access to functions and constants from the C standard math library. A description can be found on WikiPedia or a more complete reference at Dinkumware.

Each function has three versions: one overloaded for different floating point types, and one each for float32 and float64 values respectively with the precision postfix that can be passed to methods expecting an unambiguous function type. I.e. there are functions sin, sin32 and sin64.

The library provides:

trigonometric functions

sin, cos, tan, asin, acos, atan, sinh, cosh, tanh, asinh, acosh, atanh.

logarithmic/exponential functions

exp, exp2, expm1, log, log10, log1p, log2, logb, modf, hypot.

power and absolute value functions

pow, sqrt, cbrt, fabs, hypot.

gamma and error functions

erf, erfc, lgamma, tgamma,

integer functions

ceil, floor, nearbyint, rint, round, trunc, nextafter.

library error handling functions

errno, setErrno, testexcept, clearexcept.

other functions

fdim, fmod, remainder, copysign, fpclassify, isfinite, isinf, isnan, isnormal, sign, atoi, atof, usecs.

floating point classification and error condition constants

HUGE_VAL, INFINITY, NAN, FP_INFINITE, FP_NAN, FP_NORMAL, FP_SUBNORMAL, FP_ZERO, FP_ILOGB0, FP_ILOGBNAN, ALL_EXCEPT, INVALID, DIVBYZERO, OVERFLOW, UNDERFLOW.

physical constants

E, LOG2E, LOG10E, LN2, LN10, LNPI, PI, PI_2, PI_4, PI1, PI2, SQRTPI2, SQRT2, SQRT3, SQRT1_2, SQRTPI, GAMMA.

Below is a simple example:

    import crack.math sqrt, pow, PI;

    float length(float x, float y) {
        # x*x + y*y would perform better but would be less illustrative
        return sqrt(pow(x, 2) + pow(y, 2));
    }

    len := length(10, 5);
    x = cos(30.0 / 180 * PI) * len;
    y = sin(30.0 / 180 * PI) * len;

Bindings

The crack.exp.bindings library provides some facilities to ease integration with C libraries. It is often possible to model C types and functions using Crack classes and functions providing that you can remove some of the crack facilities (such as garbage collection and vtables). bindings is deprecated in favor of extensions (see The Extension Generator).

Opaque

The Opaque class is used as the base class for types that where the crack code does not need to access instance variables. In these cases, the C code must define functions to obtain and manipulate the object. More information on Opaque can be found in Primitive Bindings.

Wrapper

Wrapper is the base class for types where C code requires the address of a primitive value (typically for an output parameter).

The crack.exp.bindings module currently defines two wrappers:

IntWrapper

Used when C code calls for a pointer to a single integer.

ByteptrWrapper

Used when C code calls for the address of a char * (or byteptr in Crack).

You can also derive from Wrapper directly to implement your own pointer functionality.

It is important to note that Wrapper and Opaque are not derived from Object, and as such they have no garbage collection. Opaque objects should be associated with real objects that know how to clean them up using their low-level functions. Wrapper objects must not be assigned to other variables, otherwise they will be garbage collected twice. Values referenced by wrappers conform to whatever lifecycle arrangements are provided by the low-level APIs that they are obtained from.

Networking

The crack.net module includes support for TCP/IP socket level programming.

A socket is a communication endpoint for TCP/IP communications. Sockets can either be connection channels, allowing you to send data to a matching socket elsewhere on the network, or listeners which wait for new connections.

We create a socket as an instance of the Socket class:

    import crack.net Socket, AF_INET, SOCK_STREAM;

    s := Socket(AF_INET, SOCK_STREAM, 0);

This creates a "stream" (TCP) socket for a reliable connection over the INET protocol.

With a little more code, we can create a very basic server program:

    import crack.net Socket, InetAddress, AF_INET, INADDR_ANY, SOCK_STREAM;
    import crack.exp.error err;

    Socket srv = {AF_INET, SOCK_STREAM, 0};

    # allow the socket's port to be immediately reused after the program
    # terminates (useful for debugging and server restarts)
    srv.setReuseAddr(true);

    # bind to port 1900 on all interfaces
    if (!srv.bind(InetAddress(INADDR_ANY, 1900)))
        err.do() `error binding socket`;

    # queue up to 5 connections
    srv.listen(5);

    # accept loop
    while (true) {

        # accept a new client connnection
        accepted := srv.accept();
        if (!accepted)
            err.do() `error accepting new connection`;

        # read up to 1K from the new connection
        data := accepted.sock.read(1024);

        # write it back to the new connection (we could have also used the
        # send() and recv() functions)
        accepted.sock.write(data);
    }

A client script might look like this:

    import crack.sys exit, strerror;
    import crack.net InetAddress, Socket, AF_INET, SOCK_STREAM;
    import crack.lang ManagedBuffer;
    import crack.io cout, cerr;

    Socket s = {AF_INET, SOCK_STREAM, 0};

    # connect to localhost (127.0.0.1)
    if (!s.connect(InetAddress(127, 0, 0, 1, 1900))) {
        cerr `error connecting: $(strerror())`;
        exit(1);
    }

    # this time, we'll use send and recv
    if (s.send('some data', 0) < 0) {
        cerr `error sending: $(strerror())`;
        exit(1);
    }

    # receive from the socket
    ManagedBuffer buf = {1024};
    int rc;
    if ((rc = s.recv(buf, 0)) < 0)
        cerr `error receiving: $(strerror())`;
    buf.size = uint(rc);

    cout `got $(String(buf))\n`;

When writing a server, you usually want to manage multiple connections. You can use the Poller class for this. Poller wraps the POSIX poll interface, which allows you to wait for an event on a set of Pollable objects (Socket is derived from Pollable, so you can use this to manage sockets).

Poller allows you to add any number of Pollables and the events you care about on them. You can then wait for an event (or a timeout) using the wait() method. Here is an example of a simple server program (it just echos back whatever it reads from a client) written using Poller:

    import crack.net sockconsts, Poller, PollEvent, Socket, SockAddrIn;
    import crack.cont.list DList;
    import crack.exp.error err, strerror;

    Socket srv = {sockconsts.AF_INET, sockconsts.SOCK_STREAM, 0};

    # allow the socket's port to be immediately reused after the program
    # terminates (useful for debugging and server restarts)
    srv.setReuseAddr(true);

    # bind to port 1900 on all interfaces
    if (!srv.bind(SockAddrIn(sockconsts.INADDR_ANY, 1900)))
        err.do() `error binding socket`;

    # queue up to 5 connections
    srv.listen(5);

    # our list of clients
    DList[Socket] clients;

    # remove a client from the list
    void removeClient(Socket client) {
        i := clients.iter();
        while (!(client is i.elem()))
            i.next();

        if (!i)
            err.do() `unable to remove client: $(client.fd)\n`;

        clients.delete(i);
    }

    # accept loop
    while (true) {
        Poller p;

        # add the server socket and all of the client sockets
        events := sockconsts.POLLIN | sockconsts.POLLERR;
        p.add(srv, events);
        i := clients.iter();
        while (i.nx())
            p.add(Socket.cast(i.elem()), events);

        # wait indefinitely for the next event
        rc := p.wait(null);
        if (rc < 0)
            err.do() `error during poll: $(strerror())`;

        PollEvent evt = null;
        while (evt = p.nx()) {
            cout `got event\n`;
            # if this is the server, do an accept.  Otherwise do a read.
            if (evt.pollable is srv) {
                accepted := srv.accept();
                if (!accepted)
                    err.do() `error accepting new connection`;

                clients.append(accepted.sock);
            } else {
                # read some data, write it back (what we should really do is
                # add sockconsts.POLLOUT to the events that this client is
                # listening for, and then write when the socket becomes ready
                # to write, but in the interests of simplifying the example
                # we'll just write back to it)
                client := Socket.cast(evt.pollable);
                data := client.read(1024);
                if (!data) {
                    cout `removing client $(client.fd)\n`;
                    removeClient(client);
                } else {
                    client.write(data);
                }
            }
        }
    }

Logging

The crack.logger module provides classes for logging messages with configurable formatting, severity level and output destination.

Core functionality

The core of the module is the Logger class which implements 5 logging severity levels: FATAL, ERROR, WARN, INFO, DEBUG. Only messages with a severity level higher than the minimum for the Logger object will output.

An example looks like this:

    import crack.logger Logger, ERROR, DEBUG;
    import crack.io cerr;

    logger := Logger(cerr, ERROR);
    logger.log(DEBUG, "This will not be logged");
    logger.log(ERROR, "This will be logged");

The output will look something like this:

    2012-03-24T15:40:35 [ERROR] This will be logged

The first argument of the constructor can be any Formatter object. Other convenient constructors are:

    Logger(String filename, uint level);
    Logger(File file, uint level);
    Logger(Writer w, uint level);

The Logger class defines convenience methods fatal, error, warn, info, debug to log messages with the eponymous severity levels:

    logger.debug("This will not be logged");
    logger.error("This will be logged");

Formatter protocol

The logger module also provides a LogFormatter class that implements the Formatter protocol. Extending the example above to use a LogFormatter instead, we get:

    import crack.logger LogFormatter;

    debug := LogFormatter(l, DEBUG);
    error := LogFormatter(l, ERROR);

    debug `This message will not be logged`;
    error `This message will be logged`;

That is, a LogFormatter instance always logs messages with the given severity level. The logger module defines the formatters fatal, error, warn, info, debug that logs messages to cerr using the default log format.

The LogFormatter class also implements the convenience constructors LogFormatter(String filename, uint level), LogFormatter(File file, uint level), and LogFormatter(Writer w, uint level). Using these, the severity level of the Logger and the LogFormatter is the same. To change the log level of the undelying Logger instance, the method setLoggerLevel(uint level) can be used. The severity level of a LogFormatter instance can be changed using the setLevel(uint level) method.

Message formatting

The Logger class implements log message fields, named msg, datetime, progname, escapemsg, and severity. The default fields used are datetime, severity, msg, leading to the output shown in the example above.

The fields can be specified using the constructors Logger(Formatter fmt, uint level, Array[String] fieldNames) or using a space delimited field specification Logger(Formatter fmt, uint level, String fieldSpec), as follows:

    l := Logger(cerr, FATAL, "datetime severity progname escapemsg");

The progname field is simply the value of argv[0], while escapemsg is the log message with special characters represented using the escape sequences produced by the ascii.escape module.

The format of the datetime field is determined by a string in strftime, format, with the default being "%Y-%m-%dT%H:%M:%S", as defined by ISO-8601. This format is only able to produce timestamps with second accuracy, as it relies on the crack.time.Date class.

Message fields

Field representations are constructed by MessageField instances. To add a new type of message field, define a class as follows:

    import crack.runtime usecs;

    MilliSecField : MessageField {
        oper init(LoggerOptions options): MessageField(options) {
        }

        void format(uint level, String msg){
            options.fmt.format(usecs()/1000);
        }
    }

The field can be registered with the Logger, and the fields specified with:

    logger.setNamedField("msecs", MilliSecField(logger.options));
    logger.setNamedFields("datetime msecs severity progname escapemsg");

Logger options

The Logger class contains an options member of type LoggerOptions, with members, defined as:

    class LoggerOptions {
        uint seq;            // Message sequence number
        String timeFormat;   // strftime date format
        String sep, eol;     // Field separator and end of line
        Formatter fmt;       // Output formatter
        uint level;          // Logging level

        oper init() {}
    }

GTK

crack.gtk is a very minimal GTK module. It currently provides classes for the following GTK objects:

Toplevel

A top-level (window manager level) window.

Tooltips

Used to tie fly-over help text to widgets.

Button

A pushbutton widget.

Entry

A single line text entryfield.

HBox

A container that arranges child widgets horizontally in a row.

VBox

A container that arranges child widgets vertically in a column.

App

Models an application with an init function and a main loop.

Here's a sample program:

    import crack.exp.gtk App, Button, Entry, Handlers, HBox, Label, Toplevel,
        VBox;
    import crack.sys argv;
    import crack.io cout;

    App app;

    # this is going to be our window.
    class MyWindow : Toplevel {

        # create a bunch of child widgets.
        Label lbl = {'Your Name:'};
        Entry dataEnt;
        Button doneBtn = {'Close'};
        VBox v1 = {false, 10};
        HBox h1 = {false, 10};

        # print out all of the data collected by the window.
        void getData() {
            cout `Entry text: $(dataEnt.getText())\n`;
        }

        # handler for the button class - print out the data and quit.
        class DoneBtnHandler : Handlers {
            # note that this creates a reference cycle - we need to do
            # something to break the cycle if we care about memory leaks.
            MyWindow win = null;
            oper init(MyWindow win0) : win = win0 {}
            bool onClicked() {
                win.getData();
                app.quit();
                return false;
            }
        }

        oper init() {
            # arrange all of the widgets
            add(v1);
            v1.add(h1);
            h1.add(lbl);
            h1.add(dataEnt);
            v1.add(doneBtn);

            # set the done handler.
            doneBtn.setHandlers(DoneBtnHandler(this));
            doneBtn.handleClicked();

            # show all of the widgets
            lbl.show();
            dataEnt.show();
            doneBtn.show();
            v1.show();
            h1.show();
            show()
        }
    }

    app.init(argv);
    MyWindow win = {};
    app.main();

Crack's GTK libraries are really a toy implementation or proof of concept. You can probably implement minimal programs with them, you can implement larger programs if you care to augment the library.

Command Line Option Processing

The crack.exp.cmdline module allows you to do options processing:

    import crack.sys argv;
    import crack.exp.cmdline CmdOptions, CMD_BOOL;

    CmdOptions opts = {};

    options.add('help', 'h', 'Show help text', 'f', CMD_BOOL);
    options.add('port', 'p', 'Port number', '', CMD_INT);

    options.parse(argv);

    if (options.getBool('help'))
        showUsage();

    # get the port number
    port := options.getInt('port');

There are numerous other modes of interaction with this module, see the module itself and the test script for details.

Appendix 2 - Migration

Crack guarantees backwards compatibility between ternary release numbers (so 0.2.1 should be compatible with 0.2). We will adhere to this policy until we release 1.0, at which point we will begin guaranteeing backwards compatibility until the next major version number (2.0). See Compatibility for caveats and details.

Until this time, the language and all of its libraries are considered to be "in flux:" anything can change between minor version numbers.

That said, we want to make the prospect of early adoption to be tolerable. If you want to avoid code breakage when upgrading, we recommend two strategies:

The remainder of this appendix describes the things you need to know when upgrading between versions.

From 0.8 to 0.9

From 0.7 to 0.8

From 0.6 to 0.7

From 0.5 to 0.6

From 0.4 to 0.5

From 0.3 to 0.4

From 0.2 to 0.3

Compatibilty

Crack promises to be backwards compatible across major versions starting at 1.0. So all 1.x versions of the language and its core libraries should be compatible with earlier 1.x versions. We define compatibility as follows:

Code that functions without error in one version will function without error in a compatible version.

There are some caveats to this rule:

Appendix 3 - Library Conventions

The standard library uses the following naming conventions:

As the language dictates, module-protected members begin with underscores.

The following rules apply to method and function names (we use the word "function" in the following context to refer to both function and methods):